Search results

Mo TCC Info, Electric = http://www.turbobuick.com/forums/threads/what-signals-should-i-have-at-the-trans-plug.250799/ Hydraulic = http://www.turbobuick.com/forums/threads/lockup-solenoid-tutorial.260404/

87 should have the #690 Pump body with the step machined to prevent Bushing walk. Links above are for a 700r4 but, they use the same style/type Pump as the 2004r. Just use a different style/size Stator support.

Mo Info on Drain/Relief hole & staking the pump Bushing if it's an older non-stepped seat Pump body/housing. http://www.crankshaftcoalition.com/wiki/T-700r4_through_4L70E_tips_and_tricks#Drain_back_holes...

You should talk to Dusty on here about a 9.5" PTC Non-Lock Converter. http://www.turbobuick.com/forums/members/dusty-bradford.65/

What about the Low/Reverse "cup plug / rubber seal" in the Case? May have been damaged or fallen out when the Valvebody was removed. Figure 8-19 on Pg.132 in CK's manual. Low/Reverse "cup plug / rubber seal" can be seen in the 2nd Pic here, http://gnttype.org/forums/showthread.php?t=9724&page=2...

Carbon has more/better holding power, Kevlar has more longevity.

It hits the side of the raised section. Yes it can create a dent, as long as it doesn't push a hole through the contact area and the Band to Pin clearance is correct it should be fine. May be necessary to use a Screwdriver to help align/position the Band if it's needed. The Pan would have to be...

You should be able to see where the Balls have been moving in the Case/Vbody & Sep. Plate. Clean/Polished areas. This should also help: http://www.bing.com/images/search?q=2004r+checkball+location&qs=n&form=QBIR&pq=2004r+checkball+location&sc=0-0&sp=-1&sk=

Area where half circle/ half moon is on left side raised rib.. http://www.sonnax.com/system/announcement/S043961.pdf Or http://www.sonnax.com/product-lines/high-performance-transmission/parts/1994

Solenoid Info/Pics >> http://www.montecarloss.com/TCC_Solenoid.html You'll need a splice in Universal Solenoid, the OEM type w/Harness are no longer available. Examples: http://www.transmissionpartsusa.com/2004R_transmission_solenoids_s/4847.htm...

Case to Hose/Line = Male -6 AN to 1/4 in.-18 NPSM http://www.summitracing.com/parts/SUM-220027/?rtype=10 A 45* fitting on end of Hose @Trans end would probably work best.

When using an Aftermarket Carb, a TV geometry corrector bracket is needed. Easy to spot on the Carb linkage. http://www.summitracing.com/parts/sum-700203 Dave Husek may be close to you. http://www.turbobuickperformance.com/ Other Shops/Builders list >>...

http://www.turbobuick.com/forums/threads/the-very-first-bolt-on-bell-2004r.402724/ Probably overkill for your App.

At WOT the Gov & Vbody shift valves control shift points. At part throttle the Gov, TV & Vbody shift valves control shift points. From BTO's site: "The TV cable used with the 4L60/700R4, 2004R & 200/200C transmissions should not be thought of as an automatic downshift cable. The TV cable used...

X2^^, also make sure you back flush the Cooler & Lines with a good Solvent, Brake clean etc...

Pickup tube looks like a copy of "WE4" Bruce's (Bottom Feeder Sumps). Pics of his Deep & Shallow P'up Tubes & Pans here: http://www.seturbo.com/cat-buick/catalog2.php?cate_id=57&main_cat=15 If it's a Cast Aluminum pan, they are very heavy, especially the Hughes pan.

Should work fine, Ratio Adapters were used by the Factory years ago, 70 Chevelle etc.. A little cheaper here: http://www.transmissioncenter.net/speedometer_calibration_______va.htm#gm%20ratio%20adapter Or click on link here, if link above doesn't work...

Try these: http://www.f-body.org/gears/ http://www.wallaceracing.com/speedo-calculator.php http://www.wallaceracing.com/Calculators.htm Tire Info, rolling circumferences etc.. http://www.gnttype.org/techarea/suspension/Tirechart2.html Trans Info. >>...

You can get the GM gear Part #'s here >> http://chevellestuff.net/tech/speedo.htm Locate parts here >> http://www.partsvoice.com/ , here >> http://www.partszoneonline.com/index.php , or here >> http://www.transmissioncenter.net/speedometer_calibration_______va.htm A Ratio Adapter may be...