Search results

  1. M

    misc engine parts, intake, injectors, pistons

    I have the engine from my 87 t type. The block was pretty fresh when it came back out. I have the pistons that are 30 over if I remember correctly, the rods, crank, crank was 10 under, might need another, there is very light rust on part of it. I also have the front cover and water pump...
  2. M

    low tps volts at wot

    I posted this one in the other forums. I am hoping anybody may know going on with this thing. I cant get anything over 3 volts at wot. And, very hard to get the .40 at idle. new tps, new ecm, new ground, new battery, new alt, checked fusable link....The car just wont idle like this. Stays at 3k...
  3. M

    relays on inside of pass. fender?

    HI guys, what are those relays on the inside of the passenger fender well? I unhooked them with the car running on it died. I am still in the process of finding whats causing my super low voltage all over the car. Thanks.
  4. M

    87 white limited, 73k, lots of upgrades

    87 white limited turbo t, 73k miles, dark red interior, bench seat, column shift, digital dash, good shape inside. White exterior, no rust, black out trim, Gn spoiler, GN wheels, good shape outside. Motor, rebuilt a while back, fully ported heads, cam, welded drivers side header, PI front mount...
  5. M

    low volts @TPS and cam sensor...anyone?

    HI guys, I have wicked low volts at the TPS. I cant get it past 3 volts without pointing the TPS straight up towards the hood! And, thats just plain wrong. And, the cam sensor, close to 5 volts! I checked the grounds and they all read out just fine. I was thinking bad ecm? Or, Is there a relay...
  6. M

    tons O fuel in my intake! the spiral continues

    Hi Guys, And, with each thing that I think that I fix, another gremlin pops up! So, I thought I fixed the cam sensor. Now, the car runs even worse. No more smoke though! However, its just idling all over and has no power. I did find yet another vaccum leak. The doghouse was leaking pretty...
  7. M

    and again, cam sensor was loose!! Need to set

    HI Guys, and again, here we go. While I was trying to fix the other 400 problems, I had a type of hot start when the car was cold. I checked the cam sensor, and sure enough its loose. Just moving around where ever it wants. I checked to set it, so after I think I have the position right, I cant...
  8. M

    scanmaster wanted! Chicago area

    i am taking the advise of the fellows here. I am in need of a scanmaster for my 87 buick. If possible, i would be thrilled to find one in the chicagoland area! Thanks guys!
  9. M

    need quick help on setting TPS

    HI Guys, I thought that setting the TPS was well with in range of abilities. however, I cant seem to get it right. Which wires do I check? Also, I assumed it would be the same wires for WOT. Last night when I tried this, I couldnt get close to the .47 volts. I had to change the sensor. After...
  10. M

    car sat 3 years, need some help!

    Hi guys, i sold this buick 7 years ago, and recently bought it back to save it!! The car has been in storage for 3 years. It didnt even seen light of day. Thus, I am not sure where to start. I changed the oil and plugs. new gas and additive, but under any load at all, it just pops and...
Top