Search results

  1. B

    Push rod length

    I thought I checked my pushrod length when I built my motor, but not sure if I did it, right . I have been driving my car for a while, and nothing has broken. Would it be too late now to check the pushrod length again or cents, nothing has broken. Should I leave it alone?
  2. B

    Looking for a set of GN 1 valve covers

    Do you have a pic and how much are you asking
  3. B

    Looking for a set of GN 1 valve covers

    Looking for some different types of valve covers for my 87 GN .
  4. B

    WTB Casper's White Face Knock detector

    I did the oil filter adapter at work on a lapping table. but it is leaking from where the gasket and the cover is in the same place it was before but it was fine for a long time then just started leaking and still leaking at the same spot will have to take it down and check don't think its the...
  5. B

    WTB Casper's White Face Knock detector

    Just not sure why after so long it just started leaking in this one area ? I will wait till I have all the gaskets and then take it apart again. Wondering if I missed a small piece of gasket or something. It’s like the gasket is not even touching there the crazy thing is it not leaking more...
  6. B

    WTB Casper's White Face Knock detector

    Well got it back together have good oil pressure but still leaking in the same spot . It’s leaking right at one of the bolts took the bolt out crank the car up leaked just the same soaked the gaskets in oil first before installing them . Not sure why this is happening it was good for a long...
  7. B

    WTB Casper's White Face Knock detector

    It’s installed in the car so that’s not a option . The cavity is .870 and gears are .0872 for a .005 gasket puts a .003 clearance .
  8. B

    WTB Casper's White Face Knock detector

    Well I measured the cavity depth and it’s at the max .870 so it’s going to take around a .005 gasket since I don’t think I can find a .004 gasket a .005 will give me a .003 clearance.
  9. B

    WTB Casper's White Face Knock detector

    Mine is a after market cover
  10. B

    WTB Casper's White Face Knock detector

    I have tried plastigage and the feeler gage method with out a gasket and with a gasket . I am feet different readings every time . It’s driving me crazy . My motor is installed in the car had a oil leak so took the adapter apart to replace the gasket . . Do you need to take the reading on the...
  11. B

    overboost / popping under heavy throttle

    My timing cover is installed so it’s plastigage or I have another plate that I was going to drill a hole where the drive gear is located and and installed it with a gasket by pushing up on the gear till it hits the top of the cavity take a reading and subtract the plate and the gasket that...
  12. B

    Weld Magnum 2.0 15X3.5 Brand new

    Ok I was worried about it cutting through if I went to deep .
  13. B

    Weld Magnum 2.0 15X3.5 Brand new

    It says the grove should be a 1/4 deep that seems a lot this is mine it’s just a little less then a 1/4 . Does it have to be a 1/4 anyone ? Will it cut through at a 1/4 ?
  14. B

    overboost / popping under heavy throttle

    What is the torque for the 6 oil filter adapter bolts? Thought I saw it was in inch pds? .
  15. B

    Oil pump thrust plate

    Ok guys I question . I got a gasket kit from T/A performance and it had instructions on setting the pump clearance up . When using the feeler gage method it said get you reading and add .004 if using a booster plate and .002 if using pump cover only . Why .004 I thought you would only add .002...
  16. B

    Coach Oil Booster Plate

    Did you sell it ?
  17. B

    4.1 liter four barrel intake

    Thought there was someone on the forums selling them not sure who ?
  18. B

    Husek 3021 Lock-Up Torque Converter for Sale

    what's the stall on it?
  19. B

    GNX center caps

    So them are the right caps for the tokens ? How much did he charge you ?
Top