Search results

I am wring a powermaster into a new harness which I am building. There are 3 wires coming from the C100 bulkhead 12g Power, Brown Fan relay power and the tan/wht waring light. The PM motor shares the brown fan relay wire with the fan relay and the 12g Red wire with the coolant delay relay both...

I am re-wring my GN with a Racepak Smartwire and eliminating the factory wiring all together with the exception of the front and rear light harnesses. I am having trouble finding info or figuring out how to wire the factory rear light harness I will have 5 wires running to the rear harness...

I have another semi-complete motor sitting here with no home that I may finish or just sell out right. It is a completely machined and fresh 109 block .010 with NIB RaceTech pistons. I got the motor in a deal with some other stuff and did not do the machine work, it is nice freshly machined...

I've been meaning to make a post about my 87 GN which I raced in TSO for many years and have a ton of stories and history with and I recently bought back. It is hard to make a thread about this car that dosent turn into a novel! Plus this site is so sketch to take the time to do a nice build...

I have two complete billet roller camshaft set ups for sale one new one used 1. New 212/206 Weber Billet roller complete with NEW set of Morel Hyd roller lifters and complete Weber nose hardware and Billet timing chain set with a new chain. $1700 First three pics, I dont have a pic of the new...

I have an extra set of S2 heads complete with rockers valve covers and carb on-center intake . Heads are nice I was told they came off a Hendrick motor. Good depth on mill pockets $1750 shipped.

I have set of very lightly used Diamond piston that have literally seen boost for only one dyno session. I made some changes to my motor and ended up with a different piston design. Pic is spec sheet from Diamond and these pistons were made for a lot of power and cylinder pressure. I also...

I thought I would post some pics of my Ttype which has been an on going 18 year project that is still a work in progress. It finally made its way to the dragstirip and on to a road course recently with some success . I am having a blast with this car this year and finally enjoying it more than...

I have the 11" SS4+ Baer front brakes with modified spindles on my T-type with 16" GTA wheels. Baer only makes a 11" brake kit for the front with 16" wheels but the rear disc brake kit is 12" and fits the wheels just fine. I really like how my GTA wheels look, I put a lot of $$ into...

Part Number: PTB150-4240 Manufacturer: Precision Turbo and Engine MSRP: $3,149.99 plus optional polished compressor housing HP Rating: 1,200 PTE’s PT7675 Turbocharger features the following: • Exclusive CEA® (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum...

Bringing this back from the dead since I cant seem to stay away from building Buick racecars! Dusty I see you ran a bar from #1 crossmember to the bottom of the frame x-member which looks like an aftermarket one like a Merilatt? How did you tie that bar which would be the 2B bar to the rear of...

I am completely re-doing my GN and will have a lot for sale. Some of it like the rearend is still on the car to keep it rolling. The following parts were used on my TSO car and have been 1.23 60' on old school drag radials at 3450#. The car routinely sixty in the high 1.20s 9" Ford Moser...

I was keeping this as a back up but tire of tripping over it already lol! I ran this block in my car in 2009 and have been really fast with it and have many street miles on it. The block is fully machined and ready to assemble with fresh decks, line hone, cylinders honed with deck plates no...

I am swapping to a Holley dash and selling the gauges out of my car. Complete dash with all wiring which can easily be adapter to the factory harness. All sending units and programmable shift light included. $750

I am updating my car and have the following for sale Weldon 2035 with pre/post filters $750 This pump was rebuilt in 2011 by Weldon and has not been run other than idle time or mild street it is pretty much a new pump. Plenty of pump for 170+ mph at 3400# RCI 10 gallon fuel cell with fuel...

FAST XFI 2.0 with NTK WBO2 used FAST EZLS Ignition control module part# 301312E NEW in the box FAST XFI Logger Dash used FAST XFI Main Engine Harness part # 301100 NEW in the box Open to offers must go! Package deal $1200!!! I have 6 XLR1 smart coils and the harnesses needed. I can include...

I have a complete PnP Accel Gen 7 with NTK WBO2 sensor, datalogger, adapter harness for factory wiring harness, V4.0 or newer Gen7 Prokey USB software cable $375 I also have a Racepak DFI comm cable to run a Racepak datalogger $150 A complete Dell Laptop with serial port and ALL software...

I have two motors and only need one to run this season and would like to sell the other. I have another 4.1 offcenter with new TA heads I am planning another build for next year so the motor I keep to run may also be for sale next spring. Both of these motors are assembled and complete and...

I just saw this in NASA newsletter and have not seen or heard about this guy but apparently he is killing it with a Buick GN with a LS motor in it. This is super cool and no small feat in a g-body if you ask me...

Well after 16 years in my house in a suburban subdivision and tiny 594sqft garage I have finally decided to pull the trigger and add an addition on the house so I can have my own workshop/toy box! We dug and poured the footers yesterday and I am super excited! My current garage with a pic of...