Search results

  1. T

    Spindles for Blazer brake conversion?

    Doesn't an S-10 pickup have the same spindle? It's not hard to find those in the junkyards. I'd check ebay too.
  2. T

    Stock Intercooler complete with everything needed to install.

    How much for the up-pipe? It's drilled for the alky-control kit correct?
  3. T

    TTA Brakes?

    Yeah, I just replaced a seized caliper a few weeks ago. It was 50-60 bucks for a remanufactured caliper at oreillys.
  4. T

    TTA VSS Sensor?

    Good to know!
  5. T

    TTA VSS Sensor?

    I am not 100% sure on this, but I think you could use a VSS from a 1990 Cadillac Brougham with 5.0 (Olds 307) engine. Those had a 200-4r AND a digital gauge cluster. The 5.7 (Chevy 350) Brougham had a 700-r4, so I don't know if that would use the same VSS.
  6. T

    OER replacement wheels

    Send me some pictures and a price. I wasn't even aware that the lugs had covers at all from the factory.
  7. T

    OER replacement wheels

    Has anybody on here bought a set of the OER factory replacement wheels to see if the quality is any good? I know there are other companies that restore stock wheels, but I'm just trying to get any opinions. I don't have any factory wheels, so I'd be buying whatever I get from scratch. I'd...
  8. T

    Light weight front brake upgrade

    I'd still contend that the 98-02 Trans Am/ Camaro front brakes would be dramatically cheaper than any aftermarket brake kit with a 12" vented rotor. You can buy the cross drilled rotors with Ceramic pads for $57.59 shipped. (These are pretty decent rotors, I've used the same brand on a few...
  9. T

    Light weight front brake upgrade

    There's a company that makes hub by machining a stock brake rotor down and you can use a 98-02 F-Body brake hat and aluminum dual-piston caliper. You can get cross drilled and slotted rotors with brake pads dirt-cheap on ebay and buy the calipers out of a u-pull-it yard for ~50-60 bucks a...
  10. T

    Pair of rear Weld Prostar's

    I've got a pair of 15x8" Prostar's with correct 5.5" backspacing for a third-gen. I had a pair of 275/60-15 Mickey Thompson drag radials mounted on these and they fit perfectly, no rubbing anywhere. FWIW the car was cutting 1.44 60' times with that rear wheel and tire combo. These wheels...
  11. T

    TESTING THE WATERS, TRADE PLUS CASH FOR CUSTOM 23 ROW SLIC

    There is a pending deal on the intercooler.
  12. T

    Huge Parts List, Dec 2016 update

    I'll take the stock intercooler and brackets.
  13. T

    TESTING THE WATERS, TRADE PLUS CASH FOR CUSTOM 23 ROW SLIC

    Ok, I should have mentioned that I need to procure a stock intercooler before doing an outright sale, or I won't be able to drive the car. I've posted an advert in the Parts Wanted section and will poke around in the For Sale section.
  14. T

    WTB DUTTWEILER NECK INTERCOOLER

    I've got a TTA (that has a custom 23 row SLIC) I'm simply looking to go back to a more stock setup since I'm turning the boost down and mostly restoring the car.
  15. T

    TESTING THE WATERS, TRADE PLUS CASH FOR CUSTOM 23 ROW SLIC

    Yes, this was installed on my TTA since about 2009. It's not really that big of a deal to me if I traded a regular GN intercooler with duttweiler neck. I don't really think the TTA intercooler was a significant improvement vs a GN (especially if you are using any kind of an alcohol kit)...
  16. T

    WTB DUTTWEILER NECK INTERCOOLER

    LOOKING FOR A DUTTWEILER NECK STOCK INTERCOOLER AND BRACKETS IF YOU'VE GOT THEM.
  17. T

    TESTING THE WATERS, TRADE PLUS CASH FOR CUSTOM 23 ROW SLIC

    By the way, the first picture looks a little deceiving because the stock intercooler is closer to the camera. The 23 row cooler is WAY bigger than a stock one. That picture was simply to prove that you're not losing all of your ground clearance.
  18. T

    TESTING THE WATERS, TRADE PLUS CASH FOR CUSTOM 23 ROW SLIC

    I've got a customized 23 row stock location intercooler for a TTA. This began as a bowling green customs SLIC for a Grand National, but I cut the inlet neck off and had a custom made 2.5" inlet fabricated to raise the core up for ground clearance. This has just as much ground clearance as the...
  19. T

    89 Tta Forsale Parts Or Repair

    It would probably be cheaper to have one made. You'd just need to find a part number for the ball flange, but I'd bet money it's common to a bunch of other GM stuff and there's a Walker part number. I can't make a promise, but a 2.2 s-10 ball flange looks really similar to the ones on a TTA.
  20. T

    HD ACTUATOR FOR PRECISION S-COVER

    Adjustable HD actuator for a Precision S-Cover (4" inlet 2.5" outlet) Makes 18-25 pounds "on the spring" I had this on a 6765cea. These are $89.95+shipping from full-throttle. Like new condition $60 shipped
Top