Search results

  1. C

    6262 - Any reputable advertisers running any specials?

    would any stall speed 10 lu converter be ok with the 6262? I have been thinking of changing also from the ta49 to get rid of the surge. I have a 2,800 and a 3,200 stall to choose from.
  2. C

    Atr Exhaust Manifolds and Misc Parts

    Payment sent for throttlebody
  3. C

    Atr Exhaust Manifolds and Misc Parts

    My factory throttlebody shaft seals leak causing high blm at idle, is this a odd question?
  4. C

    Atr Exhaust Manifolds and Misc Parts

    are the shaft seals good on Accufab 62 mm throttle body . if so I will by it.
  5. C

    Eaton Tru Trac anyone running one? How do you like it?

    I cant say how it is in the 8.5 but my friend has a ls camaro with a dana 60 with roughly 1,600 -1800 hp and it holds up just fine. his 60fts off the transbrake I think are 1.3s My boss also has one in a 12bolt and it drives just like the clutch style eaton, no clunking on turns
  6. C

    advice on tuning

    I am not sure what you mean. I did try both ways of triggering it. Tps and manually with the space bar. Both ways had the same results . It works fine on the street but not at the track. I think maybe it might be a bad connection at the ecm, I was thinking the g force at launch with traction...
  7. C

    advice on tuning

    track update Lowered boost to 25#s installed 10" 3200 converter At track powerlogger wont record a full log, stops log as soon as I leave the line, First pass no timing added 7.60 with a 1.67 60ft Second pass same as first trying to get logger to work, Ended up using recall on the scan master g...
  8. C

    advice on tuning

    I will try lower boost and throw in the 3,200 converter and see what happens Tuesday at the track.
  9. C

    advice on tuning

    Do you think the 3,600 stall helped? I Also have a 3,200 10" I could try to see if it helps the 60FT ?
  10. C

    advice on tuning

    Ta49 turbo, mods in my signature
  11. C

    advice on tuning

    Only log from the night It was lean on this pass, and I added fuel after this run
  12. C

    advice on tuning

    Its a 10" 2800 lu converter. Yes I know the 60ft is soft. I thought it might be because the 3.73s make it easier for the car to try to push threw the brake. When I had 26" tall tires I couldn't hold much boost at the line but with the 28" I have now it hold more.I think it was roughly 10 to 12...
  13. C

    advice on tuning

    new comp 980 springs , trans not slipping , I have no idea how to log converter slip. Shifts at roughly 5,200 rpm and drops to about 4,800 on each shift roughly. My powerlogger was being dumb and wouldn't let me save the files, I had to restart the computer to get it to work but I don't think...
  14. C

    advice on tuning

    Went to the track last night and couldn't get the car to run any faster than a 7.75 in the eigth mile. I tried boost from 28 to 34 lbs and richer and leaner 10.8 to 11.3 afr. All passes made the same mph of 88 mph, 0 knock on all runs. SO should I try running more timing . I was really hoping I...
  15. C

    Breaking down my stock motor

    Take a lot of pictures, Plastic bag bolts and parts and label them. And when reassembly comes check then doudle check your bearing Clarence .
  16. C

    Knock Question

    Any knock is bad, If it was just on the shift I would think it is false knock. I would turn the boost down and see if go's away . Knock will cause the head gaskets to blow. What was the o2 reading at full throttle? that will tell you if its lean.
  17. C

    external wastegate size

    I ordered a precision 46 mm , Thanks guys
  18. C

    external wastegate size

    I have a ta49 turbo and I am going to get a downpipe. I think I am going to go with an external waste gate welded off the pass header before the turbo. What size wastegate would be good to use a 38mm or a 44mm. I will probably upgrade the the turbo later on to a 6262 so I would rather buy 1 that...
  19. C

    Cyberdyne digital dash

    I am interested , Is everything labeled where It go's ? And does it included instructions ? If so I will take it.
Top