Search results

So I'm refreshing this motor, I've heard it had some work done to it. It has forged Pistons arp bolts. It had a small lunati cam. Gonna put a new cam in it. It's supposed to have a bigger turbo but I don't know what size, can you tell without taking it apart?

hey you remember how to swap the hydroboost rods from the 84 to the astrovan?

im glad i found this thread, was just fixing to get the BMR springs. I noticed the springs at BMR are for all g body, according to moog the front are mostly used in v6, some 305s, so they're probably a smaller load spring.

hey my email is gsbuick65@yahoo.com

i didnt think it would be to easy to cut it down even without a machine

i ordered a new dorman cover from carquest, see what it measures

looks like a new cover, its got Timing chain cover on it, so im sure its Chinese. yea i put a edge from a square across the cover, you could still spin the idle gear, i got a .005 feeler gauge to fit smooth.

ok im checking the clearance on these gears on this car I got that has low oil pressure. its got a aftermarket timing cover on it, i laid a straight edge across the gears and theyre .005 in the hole, the gasket i pulled off is .006 used. isnt that to much clearance?

Just got this 87 GN, I'm redoing the turbo oil line, previous owner teed the oil pressure gauge into it. I'm changing over to a remote oil filter, what size hose comes with the kits you buy?

I'm putting a gn spoiler on my regal, what ya do about the end piece studs going thru the edge of the stud housing? Isn't the factory ones reinforced?

Thanks, I got one from gbody parts

Yep, that's what I need, thanks

I broke mine, anyone got a good one they want to get ride of?

You get this fixed? Im thinking about getting one, we have the same setup

When i get on it my trans will bark second but slips into 3rd, is this an adjustment or needs rebuild?

Ok finally got my new pump in, it really woke the car up. Pulls hard all the way, i can see a tranny job in the near furture. It doesn't ping no more, putting out 15.5 lbs boost. How much boost can i run? It still has alittle popping out the exhaust but goes away after car warms up, but the...

hey im putting a dw200 in my 84 i see yall aint putting the thing between the oem pump, is it not needed?

Yea I looked for you, I didn't bring my car

So I was talking to guy named adam at the nats about my car popping out the exhaust while idling he said check puel pressure first, it was set at 42 but when I got home and checked it it was 38, so I turned it up to 42 with hose off & hose plugged. But when I drive it and accelerate it falls to...

I'm using my buds monitor 4000 and I need to get my own, has anyone used the Android adapter from 1320 electronic? Was thinking of that with my Asus 7" tablet.