Search results

I have an old cold air kit, that I don't know who made it. It places a 9' K&N thru the left headlight header hole, down next to the bumper, not the kind that you have to take out the headlight. The 4" black hose that looks cloth like on the outside. About 4' long, it slides directly onto the...

I'm looking to go to COP & was wondering if anybody makes a plugin adapter to allow the cam & crank sensor to pass thru the CCCI connector. This way i don't have to run new wires to the cam & crank. And it would convert the signals to what the ECU is expecting. I'm using a DIY PnP mega squirt.

I'm in the market for a door & was wondering how good the fit & finish is on these doors? Are there different manufactures to watch out for? Also, what is recommended to buy with this door while where at it. I'm thinking a new door handle. I have hinges & window felt on order. I just put a new...

When is Richard Clark's event happening this year 2018? Also, is there an address for the event?

I went to a couple sessions at PRI trade show this year & both seem to claim power is lost to heat absorption thru the head & piston. 1 person was obviously trying to sell their coatings, claimed ~5% loss wo coatings. The other was Ed Isky, which he was just telling old stories for the most...

A possible release date has been announced, here is a copy of an email I got from DIYautotune. "Just wanted to give you an update on the Grand National MSPNP. We have set an October 15 release date for it. Final pricing has not been announced yet, but it's going to be in the same vicinity as...

Just had the motor out & did a frame off restore, now I don't see 12v at the brown wire at the injector connector, no power at the pink/black wire at the main connector for the injectors. I do see power at the pink/black wire feeding the fuel pump relay, does this mean I have a bad wire in the...

I was trying to attach the transmission to the engine, while out of the car last night & couldn't get the holes to line up on the torque converter. We tried drilling the holes 1 size bigger, sanding the paint off the centering pin of the torque converter & different hole positions. I talked to...

I had some EGT bungs installed on my headers & the guy that did the work so far can't produce the cap that screws on the top & the sleeve that goes inside. Does anyone know where I can buy these? The best thread die I was able to screw on the bung is M12x1.5. This is what my bung looks like...

Do I need to add extra bracing on a non roll cage 9sec car? Of course I already have the back seat brace. I just replaced all the body bushings, GNX bushings & radiator support bushings.

Does anyone have any recommendations who could build a stock location liquid intercooler for me, I'm using a 6870. I already have an ATR system, so I got the pumps & fluid piping already.

June 10 4-7pm Test & Tune 7pm-1am Midnight Madness(normal weekly racing) June 11 8am Doors Open 9am Tech Opens 9:15am 1st test passes THS, TSM, as well as V6 & V8 classes. See attached for more info. http://docdro.id/yTsRkV1

June 10 4-7pm Test & Tune 7pm-1am Midnight Madness(normal weekly racing) June 11 8am Doors Open 9am Tech Opens 9:15am 1st test passes THS, TSM, as well as V6 & V8 classes. See attached for more info. http://docdro.id/yTsRkV1

Does anybody sell the replacement gaskets for the ATR crossover pipe?

I met a person recently that is very deep into tuning ECUs recently & he recommended Bosch injectors, but so far I have not found a good source to buy em, does anybody have any recommendations? So far I called PTE, arizonaGN & TurboTweak. I prefer them to be flow matched. When I look at...

I'm thinking about having these people install my rebuilt motor, install mega squirt & dyno the car. Does anyone know what the name of the shop is? It appears to be a separate company, based on what they told me so far. Is this shop reliable & do good work(ie run the new wires so they don't...

Does anyone know what the official name for this part or part#? Trying to find a place to buy em. Also, is there a black spray paint I can paint these? The piece is about 1.25" round with huge Phillips insert. Used on center front hump seatbelt hold down .

I assume it is non-synthetic? What weight? I already have the GM additive. How much will I need? I have a low profile TA performance rear girdle. +1/2 pint.