Search results

  1. I

    Power Logger Install

    I'm installing a power logger in my 89 turbo trans am. Having a problem on how to separate the boards. I thought it would be a couple of screws but doesn't seem to separate. Am I missing something? Doesn't the power logger work for tta as well?
  2. I

    High BLM's

    Having the High BLM issue (stuck at 150) and it has recently started happening. Have had the car about 15 years and haven't had to deal with it before. Its a california car so i have had to have it smogged every 2 years and not had any issues. Car had been running great up to this point...
  3. I

    TTA Trunk Lath

    My trunk latch mechanism seem to not be working anymore (can't close it). There have been times it has been stuck in the wrong position and i've been able to reset it by sticking a screwdriver in it and hitting the switch. That does not seem to work anymore and the pull-down motor is running...
  4. I

    GBodyParts.com Bumper Filler

    Wanted to give a review of the Gbody parts bumper fillers for the front and back. My rear ones recently cracked, most likely due to gas dripping on it. Front one was starting to get a little bubbly also. Had them recently installed and painted by Benny's autobody in San Diego and they came...
  5. I

    Failed Smog Evap Test

    Sorry for the repost. But i thought his might be a better place for it. Have it in the TTA section as well. Just tried to get my car smogged and was told that it failed the Evap test because of a bad filler neck. Anyone now if this is a one piece or 2 piece fix? They told me they would use a...
  6. I

    Gas Filler Neck

    Just tried to get my car smogged and was told that it failed the Evap test because of a bad filler neck. Anyone now if this is a one piece or 2 piece fix? They told me they would use a universal filler neck. But i'm wondering if it is welded to the tank. Would it be better to find a...
  7. I

    Olympic Coatings

    Just wanted to share a pic of my long overdue restoration of my heat shield. Had it done at Olympic Coatings in Escondido for $75. Had them do a polished aluminum ceramic coating and it came out really nice.
  8. I

    IAC Removal

    What size wrench is needed to remove iac. Have a 24mm and it still isnt big enough. Having iac stuck at zero problems high idle. Seems like easiest thing to check cause ive spent hours following vacuum lines and spraying things and i see nothing
  9. I

    Photography

    Didn't see any photography threads around here and i've been getting into it recently. Really been getting into the Tudor United Sports Car Series. Followed ALMS a lot when i first saw it as a pre-race at the Long Beach GPX. Great tracks with beautiful scenery and a diverse set of cars...
  10. I

    Power Logger Low Boost Readings

    I just finished installing my power logger on a stock car. I followed the instructions from the vortex website but i seem to be getting low boost readings. I can't get it to read anymore than 10psi when i get on it. I've set the option to 3bar map in the power logger. Also checked the grey...
  11. I

    Installing new fuel pump

    I am in the process of installing new walbro fuel pump with hotwire kit and was following this link http://www.turbobuicks.com/forums/buick-v6-turbo-tech/54018-how-install-intank-fuel-pump.html Is the dremel part necessary? Or can you just connect the hose supplied with the walbro? I've...
  12. I

    TCC Solenoid keeps going out

    It was pointed out that i may get more help posting in the tranny section. i had posted in the TTA section. Hoping to get some insight into possiblities why my TCC solenoid could possibly be going bad after only two years. Here is thread that i started a few years ago. Problem seems to have...
  13. I

    Dead Fuel Pump?

    I'm trying to figure out if i have a dead fuel pump. Was cruising on the freeway and all of a sudden car just died. Pulled over to the side of the road and called AAA. They checked the alternator and tried jump starting to no avail. I noticed that my fuel pressure gauge was only reading...
  14. I

    Seamfoam possible oil leak

    Used seafoam for the first time on my GN. Car has about 70,000 miles on it. As i was doing it i noticed a small leak from underneath the car. It looks like where the bellhousing has a little hole at the bottom, oil is coming out from there. Did i just screw something up? I understand the...
  15. I

    High BLM's stock car

    I've got high BLM's 145 at idle. Car is stock including the chip and regulator. I've tried looking for obvious vacuum leaks but have not been able to find any. The fuel pressure i am measuring with vacuum on is 38psi and with it disconnected 30psi so i'm guessing this may mean something. Isn't...
  16. I

    Screws for Intercooler shroud

    Anybody know where to get replacement screws for the intercooler shroud? I'm missing a few of them and its hanging off in some spots. I think there little plastic things. I'm guessing if i can't find any, i probably need to just use somekind of screws to hold in place. Tried contacting the...
  17. I

    Brake release mechanism

    My brake release mechanism has broken and was wondering how to get it out or how to fix it. Sucks cause i was at the gas station when it snapped. Pulled it out and the handle came out with the wire. Couldn't drive it until i figured out how to release it. I put my hand underneath the dash...
  18. I

    Replacement speaker

    After many years of listening to the stock stereo, i want to improve my stereo. I'm an old school audio guy and am looking to keep it clean and go with some vintage audio stuff reminiscent of its era. Just bought a PPI Pro Mos 450 Brand new and still in box. Looking to use it to run the whole...
  19. I

    Power Antenna Motor

    Anybody know where to get a new motor for the power antenna. Mine got stuck in the up position. Right now its in the shop and nobody seems to carry it. They were hoping it would be simple buy just repairing it. But he said that the motor is shot.
  20. I

    Floor Mats

    Where do you guys get new floormats from? I've looked at carmotorsports and the color that looks closest to matching is sandstone. Isn't the color suppose to be beechwood?
Top