Search results

  1. K

    Alternator Clock Position

    what is the stock clock mounting position for a 85 t type?
  2. K

    High Voltage Alternator

    Finally getting back into my 85 ttype. I am very rusty since I have not tinkered with it for years. I put a new battery on and had my friend check the starter and alternator at napa. The Charging Test showed 15.76 Volts. Is this bad? If the alternator needs replaced what size should I go...
  3. K

    Slavagable Fuel Rail?Double Post Sorry

    Sorry for double post.
  4. K

    Slavageable Fuel Rail?

    I found an old fuel rail for an 85 Turbo Regal and the Shrator Valve thing is broken off. Can I just thread the openeing and put a brass piece of some sort on it to hook up to a fuel gauge? Or should I just though it out?
  5. K

    Fixing Braided lines

    Can it be done? The line itself is good but the fittings are leaking on one end.
  6. K

    a/c pulley unit and lines

    for an 85 give me a price shipped to 47371
  7. K

    Map sensor

    2 bar or 3 shoot me a price shipped
  8. K

    Recommended Gaskets

    What gasket are the most popular for the three bolt triangel pattern? Mine look to be in bad shape they were from NAPA and had a black coating with metal on the inside
  9. K

    Ac/Heating Units

    My heating and ac untis are all original and are starting to fail. The metal lines are starting to get bent or are getting cracks in them. If I were to take out all of the ac/Heating units what all would I have to do. Eventually when I felt like replacing the parts or found good used ones I...
  10. K

    Benefits of a 3 bar MAP Sensor?

    What are the benefits I never really understood?
  11. K

    Hooking Up My Oil, Water & Knock gauge.

    Water - screw into one wire sensor location on front of block. Right? Best location to wire into? Acc Fuse Oil - came with a sending unit, could I keep my stock sending unit and t out of it for the oil feed line to the turbo and take the other end of the t to the gauge? Wiring? ACC fuse...
  12. K

    Oil Brass Fitting

    The brass block that attaches to the block, and the oil preassure sensor attaches to it also. I have an 85 T type
  13. K

    Ebay Turbo

    What kind of turbo is this?? It says it is for a hot air car eBay Motors: Grand National Turbo Charger Non-Intercool (item 220086107229 end time Mar-01-07 19:40:34 PST)
  14. K

    Rim Restoration

    I have the 85 t type wheels and they have been sitting in my garage for 5 years. I have been wanting to get them refinished and I was reading some past posts on guys who redid their own wheels. I have all the necessary equipment except for the powder coating stuff. Can I use my spray guns...
  15. K

    I think I messed Up

    I was replacing the oil feed line and for some reason the end that goes into the motor was stuck and tried to loosen it for about a 1/2 hour. Anyways eventually I noticed the sensor moved a little bit and the piece that connects to the motor broke off!!:mad: If there is any confusion where...
  16. K

    A/c Lines

    I need the lines that come off the black cannister and the one that goes into it. I broke one of mine, would take the whole thing out but I want to keep the stock look. Thanks
  17. K

    Oil Feed Part

    I have the braided line to update my oil feed line but the part attached to the turbo where the oil feed line attaches seems to be stripped. The 3/8 adapter will not tighten up so I can hook up the braided line. Does anyone know where to get the part that the feed line attaches to on the...
  18. K

    Got It Started, Heres My Numbers

    I think I still have a slight crack in the passenger side header and possibly need a new doughnut gasket for my downpipe. Fuel Preassure (couldnt find my alan wrenches but it is between 42&43 line off) RPM 950-1000 02 Voltage .45-.46 Cross Counts 52-69 TPS .44; WOT could only get to...
  19. K

    spark plugs wet??

    car was starting and running fine and now it wont start. I unhooked the ecm to acharge the battery then put in my new TurboTweak chip and can't get the car to start. The last time I drove it, it was running rough and I just assumend it needed to be tuned in. I was reading past posts and my...
  20. K

    Installing Electric Fan

    Have all the wires ran, and was wondering which wire do I splice into under the dash. I found the whit connector and am not for sure what wire to splice. Any help is appreciated Kyle Cook
Top