Search results

  1. Scott89TTA

    BRAND NEW DAY FOR TURBOBUICK.COM

    Good deal, glad you guys got it back....hopefully you can recover all the old threads and info!
  2. Scott89TTA

    Brand new no’s tta parts

    How much for the bumper cover?
  3. Scott89TTA

    TTA Trunk Lath

    Yup, Top Down Solutions...has everything you need to rebuild it...did min and it works great. They also have kits to rebuild the headlight motors too. http://www.top-downsolutions.com/
  4. Scott89TTA

    What Spark Plugs for a highly modified TTA?

    What spark plugs are the guys with highly modified TTA's running...still AC Delco R42LTS, NGK TR5 or NGK TR6?
  5. Scott89TTA

    TTA heads lifting?

    Yeah I should be somewhere near 700whp and 80's might be pushing it when I get up in the top end of boost so we bumped up to the 120's to be safe.
  6. Scott89TTA

    TTA heads lifting?

    Rob, no E85 for me closest station is 30+ miles away. I'll run a 93 pump and dual nozzle Alky tune and a C16 tune. You know I haven't even measured the valves yet. The guy I purchased the whole setup from had them set up for his 7 sec Stage powered Vega. I'll have to change the valve springs...
  7. Scott89TTA

    TTA heads lifting?

    Yeah I have the ATR full 3" all the way along with 3" DP and 3" electric dump under the passenger seat as well. If I dump it all up front I don't plan on cutting the fender. I'd only dump the exhaust under the fender. Not sure I could cut a hole either though I shouldn't worry as much as I have...
  8. Scott89TTA

    TTA heads lifting?

    I've relocated the battery to the back spare tire well. I'm actually tossing around the idea of going to a band clamp exhaust housing and running just a down pipe and gate dump forward and down through the battery tray turning outward just below the front bumper in front of the tire. That would...
  9. Scott89TTA

    John Pearcy

    Hey there John, It's been a while glad to see you are still around, what's the eBay link, is it under your name? -Scott Denny
  10. Scott89TTA

    TTA heads lifting?

    Bo, what headers did you use? My backup plan consists of a set of race ported Champion aluminum heads (more than off the shelf Champion porting) and ported Champion intake to eventually turn it up to the 7168hpq sweet spot of 28-30 psi. That should put me a good bit over 700whp and deep in the 9's.
  11. Scott89TTA

    TTA heads lifting?

    It's all about the boost/cylinder pressure on a built motor and the TTA heads. A stock motor with bolt-on upgrades you can run the boost up pretty high with a good tune and good ARP head bolts (I ran the Pro Series)...I ran 26psi on 93 and Alky for about 8 years without any issues. But with a...
  12. Scott89TTA

    TTA heads lifting?

    Once mine is running again I'm looking to defy these TTA wall limits. My new motor is fully built, 0.040 over, Comp 220/220 roller, Ross pistons, K1 rods, Eagle crank, billet mains, all ARP hardware, Champion ported big valve TTA iron heads, Pro Series ARP head bokts, Harland Sharpe roller...
  13. Scott89TTA

    Official PTP 1989 Pontiac Turbo Trans Am Coolant Reservoir Shield Group Buy

    What's your name Dale Hayes? Did you get 2 lava?
  14. Scott89TTA

    Official PTP 1989 Pontiac Turbo Trans Am Coolant Reservoir Shield Group Buy

    **********ATTENTION********* Please take a minute to review the list in the first post to verify/update your status. Thanks
  15. Scott89TTA

    Official PTP 1989 Pontiac Turbo Trans Am Coolant Reservoir Shield Group Buy

    **********ATTENTION********* Please take a minute to review the list below to verify/update your status. Thanks Official PTP 1989 Pontiac Turbo Trans Am Coolant Reservoir Shield Group Buy After several months of waiting the custom PTP Trans Am Coolant Reservoir Shield specifically designed to...
  16. Scott89TTA

    TTA Coolant Overflow / Alky Tank Covers by PTP

    They won't be available for a few weeks, at that time PTP will have a direct link...no payment through me. Please provide your name so I can add you to the list. Thanks!
  17. Scott89TTA

    TTA Coolant Overflow / Alky Tank Covers by PTP

    Ok guys, heads up! As some of you may know I have been in contact with PTP Turbo Blankets https://www.ptpturboblankets.com/ to manufacture new TTA Coolant Tanks covers. I have received the 1st unit for test fit and it was a success. The covers should start to be available in a few weeks. They...
  18. Scott89TTA

    Coolant Overflow Heat Shield

    No problem...once we get closer and have set prices I'll create an official post. Thanks!
  19. Scott89TTA

    Coolant Overflow Heat Shield

    If you can please go here to the post and add your interest. https://www.facebook.com/groups/70821697320/ Thanks
Top