Search results

  1. TireFryer

    WTB: turbo oil feed line (for PTE turbo saver)

    Installing a PTE turbo saver and need a turbo oil feed line (~36" long) - please PM me pics and price. Thank you
  2. TireFryer

    Front timing cover with melling HV oil pump and water pump (MI)

    Looks like I ended up with a couple of reworked front timing covers with blue-printed oil pump so selling one set. Oil channels have been opened, melling HV oil pump (blue printed), water pump. Selling as complete unit. $240 + SH (paypal F&F or add 3%) Located in Michigan
  3. TireFryer

    WTB: Stock 86-87 turbo engine

    I am looking for a stock 86-87 turbo engine. Preferably one that ran and had good oil psi. Stock or mildly modded is fine. My engine just needs a complete overhaul and just need a driving car. Let me know if you have anything. Thanks
  4. TireFryer

    WTB Cam

    Looking for a Stock cam with lifters. Or a mild roller cam with lifters. Looking for a package deal if possible. Have cupped tappets on mine sadly so am looking for a replacement. Thanks!
  5. TireFryer

    What does tell about the health of my cam?

    Working on the engine, used a bore scope to look at cam lobes and find this (about half the lobes have this discoloration). What does this tell about the health and condition of the cam? The tappets have a very slight concave dish to it (by feeling on fingertip).
  6. TireFryer

    Retainers

    Can I use the stock retainers and keepers while installing new comp 980-12 springs? Or do I need to find new keepers and retainers?
  7. TireFryer

    GNX dash ASC template blueprint

    Looking for the GNX ASC dash mounting template/blueprint - please PM me if you have one you want to sell or send a PDF copy. Thanks. -B
  8. TireFryer

    WTB Roller Cam

    Looking for a roller cam and lifters. Anywhere from a 206/206 on up. Let me know what you have. Thanks
  9. TireFryer

    Engine condition

    I pulled my driver side head off tonight. This is what I see. Normal amounts of carbon, the factory crosshatching is still there with no vertical scoring. There is also no lip at the top of the cylinders that my finger can feel. What’s a good way to get all the crap off of the deck of the block...
  10. TireFryer

    Engine condition

    I pulled my driver side head off tonight. This is what I see. Normal amounts of carbon, the factory crosshatching is still there with no vertical scoring. There is also no lip at the top of the cylinders that my finger can feel. What’s a good way to get all the crap off of the deck of the...
  11. TireFryer

    Large amount of internal carbon

    I’m currently in the process of installing champion ported iron heads and a champ ported race intake. Right from when I had the plenum off I could see it as the egr port in the intake was plugged with carbon. I then proceeded to remove the intake and valve covers. There is a lot of carbon in the...
  12. TireFryer

    rear air bags

    Looking for a pair of rear spring air bags with hose and spacers - please PM me pics and $. Thanks
  13. TireFryer

    G80 Posi unit

    Our 86WH1 is a pegleg so looking for stock G80 Posi unit to swap. PM me pics, condition ad price shipped to MI 48872.
  14. TireFryer

    TheYak - top notch!

    Good seller, stand up guy, good communication - deal with confidence
  15. TireFryer

    Headlights come on when I turn the key to run

    So I pulled out the headlight/parking light switch to test in another car. Then I put it back in and try to start the car. But when the key reaches the "run" position the headlights and running lights turn on and the switch is off... Tried a bad switch and the same thing happened. If I took the...
  16. TireFryer

    Underhood light fixture & working stock fuel hanger/analog sender

    Please PM me with price and pic if you have a working underhood light and/or a working stock fuel hanger/sender. Thanks
  17. TireFryer

    2 Step Not Activating

    So I installed a Bob Bailey 2 step today. I spliced the white B4 wire on the ECM harness, The white 2 step wire to the ECM side, and the grey 2 step to the engine side of the B4 wire, as the instructions state. I started the car and both the Trig and Run LED's flashed once then the Run LED was...
  18. TireFryer

    Stock turbo Garrett .63 exhaust housing

    looking for a good condition .63 garret exhaust housing. please PM me pics, info and $
  19. TireFryer

    Is my AC system R12 or converted to R134A?

    So the car has adaptors for R134a however the compressor still says R12a. Anyone recommend a way to determine if my car has been converted or not? I do have cans of Freeze 12 refrigerant as well as oil and leak stop but don't want to use them if is been converted. There is enough gas in...
  20. TireFryer

    3 inch cutout

    HI I bought a "3 inch" cutout then got it and measured and its a 3.5 inch unit. I would like to buy or trade for an actual 3 inch electric cutout. Let me know what you have! Thanks, J
Top