Search results

  1. 87GNALKY

    Took a while but figured out who is a little B*tch and who actually supports the pros.

    Do you just go around the boards trying to start shit with people?
  2. 87GNALKY

    Took a while but figured out who is a little B*tch and who actually supports the pros.

    Half ass what? Lapping the valves and re-ringing it? New valvesprings and a little spring cleaning on the intercooler, replaceing the 190 with a 160. I already have the parts purchased and including seals, springs and all gaskets. not building much boost due to valve seat issues already. How is...
  3. 87GNALKY

    Boost question

    If your using an external waist gate you can change the springs out if you have extras. If not, you could try and find another 8-10 # waist-gate spring to replace it with. I would bet that the waist gate gasket would be more likely to be the issue that a spring though. Have tried just using a...
  4. 87GNALKY

    Boost question

    Shove a banana in your tailpipe. If it blows the banana out, you have boost.... I am kidding dude.... Dont do that........
  5. 87GNALKY

    Took a while but figured out who is a little B*tch and who actually supports the pros.

    So true.. I did the car fax on mine to look at just those issues. I am 3rd owner counting the car lot that sold it to me and no DS loop or performance suspension installed. My car's biggest problem will likely be some ole lady never blew the carbon out of it.. Since I have an inner ear issue...
  6. 87GNALKY

    Boost question

    I am thinking of ways you can check your vac from your MAP sensor and the only thing I can think of at the moment is borrow another MAP or gauge from a buddy and see what it reads. Your gauge may just be out of calibration. I wish I was closer to IL, I would help you out with a power logger and...
  7. 87GNALKY

    Boost question

    I'm kinda thinking that also. It says 19# but what does it feel like? If your exhaust valves suddenly stopped seating properly, that would explain why it is lower but at a consistent lower boost.. Do you think you could have floated the valves? That's like a way out there thought though... You...
  8. 87GNALKY

    Took a while but figured out who is a little B*tch and who actually supports the pros.

    I wouldn't live in NYC for all the tea in China. Don't know how anyone would want to practically walk on top of each other just to get one block.
  9. 87GNALKY

    Took a while but figured out who is a little B*tch and who actually supports the pros.

    I kinda feel the same. If they have the money and time to invest, I wouldn't care if they won against me at the track.
  10. 87GNALKY

    U joints at the Nationals

    No. just the part I got for my stock 87 which is a MOOG 234
  11. 87GNALKY

    Took a while but figured out who is a little B*tch and who actually supports the pros.

    Since this topic has been moved to the casual area by our good friend and moderator, I want everyone that has access to this forum to answer one question in all honesty, Do you want to help the guys or gals with 10 sec or less second cars or do you want to destroy them at the track? Simple...
  12. 87GNALKY

    Took a while but figured out who is a little B*tch and who actually supports the pros.

    Sure. Send me 10 bucks and I'll make you faster than Buddy Ingersol..
  13. 87GNALKY

    U joints at the Nationals

    Looking around for some more info on U-joints before I do my re-build... Do you have any info on what the diferrences are between the Part # 234 from Advance which states it is a perfect fit for my 87,,,,, which is just a stock replacement, likely meant for 250 or less HP and the 1350...
  14. 87GNALKY

    U joints at the Nationals

    Yeah I picked up an extra just in case I needed a quick change but was just offering to help anyone in the community that gets in a bind between running or going home pissed. Doesn't matter now, I wont be there. I had tubes installed into my ears and have an equilibrium issue to deal with. I...
  15. 87GNALKY

    U joints at the Nationals

    Back in the old days, I did plumbing work for a living. A company I did installs for use to pay piece work wages. I would use an auto ignite torch handle and MAPP gas and the other guys would use propane and manual ignite. I would install any fitting, water meter, hot water heater; you name it 2...
  16. 87GNALKY

    Took a while but figured out who is a little B*tch and who actually supports the pros.

    And that's why I watch your vids. Short to the point and no BS. Of course Racetronics is a little too far away from Nashville, TN for me to purchase from, I'm glad you folks have a great supplier up there..
  17. 87GNALKY

    Took a while but figured out who is a little B*tch and who actually supports the pros.

    I guess you just have to read a lot of these old post and use your best judgement. If you see that someone was selling a part on here and they payed and the seller didn't send the part to them; that's a "vague" indication the seller was one of the "bad guys". My best judgment is to talk about...
  18. 87GNALKY

    U joints at the Nationals

    Yeah, I also heard that they practically explode when they finally release.
  19. 87GNALKY

    Took a while but figured out who is a little B*tch and who actually supports the pros.

    Probably not, but it was in this section where I read some pretty nasty crap from a while back. I guess I shouldn't be surprised about some of the disrespect I read in here from reading over the old posts and a few about people that paid for stuff over paypal and then the seller just magically...
  20. 87GNALKY

    Took a while but figured out who is a little B*tch and who actually supports the pros.

    Yes sir! Thank you very much Steve! I have learned a lot from watching your vids and reading your posts. It's people like you that make theses forums a wealth of information Sir!
Top