Search results

  1. Norman C Shibley

    Cuts out while rolling into boost

    thank you very much, I will do that.
  2. Norman C Shibley

    Scanmaster reading

    This may be a remedial question but I'm wondering if the scanmaster gets it's air flow readings from the MAF directly or the translator?
  3. Norman C Shibley

    Cuts out while rolling into boost

    I think that's where I'm at because now it is a complete stall and not just a nose dive while rolling into boost. Had to restart it like 6 times to drive 15 miles lol. But of course when you bring it back to put a scope on the sensor, it won't do it again lol. It will restart after about 30...
  4. Norman C Shibley

    Lean at first accel, like a bad accel pump on a holley

    I have been chasing the same issue for a year. Except mine also periodically leans out while cruising in addition to off idle accel and i watch the wideband go to sometimes 18/1. Did you ever find anything on your end? New PCM, O2, MAF
  5. Norman C Shibley

    Intermittent code 41

    I know it's been 20 years lol but I have the exact same issue while cruising. Did you ever find out if there was a bad wire from the Cam sensor to the ECM?
  6. Norman C Shibley

    Cuts out while rolling into boost

    Just put a new Bosch in but haven't started the car yet as I am waiting for a 6262 from Precision. Never over bumps or anything obvious like that always while rolling into boost. I could put it to 2/3 throttle and when it hits approximately 10+ lbs or above, every once in a while it will just...
  7. Norman C Shibley

    Cuts out while rolling into boost

    Will do. I installed the Champion irons myself a few years back and didn't notice anything but I will double check. Also recently repaired the fuseable links as there was one that was slightly burned through. Anyway thanks for the tip. Since it's not wide open throttle when it occurs, could it...
  8. Norman C Shibley

    Cuts out while rolling into boost

    Did it again on May 1 where I rolled into boost and it suddenly cut out as if something killed the motor but I could immediately re apply power. Will install a new crank sensor as I've had this car for 7 years and it's not been done.
  9. Norman C Shibley

    Morel lifters are loud

    This will work on our cars? The one from Kirban is twice the price.
  10. Norman C Shibley

    Took a few shots last night

    Hey I have the same XXR 521s on my Buick :) . Can you tell me what size tires those are in the rear?
  11. Norman C Shibley

    Cuts out while rolling into boost

    PAC 1201 and I replaced the MAF sensor with a new one from Eric and so far no issues
  12. Norman C Shibley

    Header wrap

    Is that mar86gn? Im looking for someone that can do coatings
  13. Norman C Shibley

    Whats the most boneheaded car thing youve ever done?

    During my time as a master tech, I came into work one morning and the car I had previously left on a lift was standing on it's back bumper. It was an older style lift with in-ground front and rear air cylinder. I had left work the previous night and not locked the valve to keep air pressure in...
  14. Norman C Shibley

    Racing a 1969 GTO tomorrow

    Even if he gets the jump, you'll catch him. Especially if your converter is locked and holding ;)
  15. Norman C Shibley

    Cuts out while rolling into boost

    Service engine light or dash lights never appear to come on but it happens so fast there really is no time to notice. How would I know through the scanmaster if the chip reset? BLM and INT go back to 128?
  16. Norman C Shibley

    Cuts out while rolling into boost

    It never fully stalls out. Feels more like an intercooler hose blew off but you can apply power immediately after. And it never happens under WOT. But yes, I will be checking that and the thrust washer integrity on the crank. Thanks :)
  17. Norman C Shibley

    Ran into some bad luck and need a frame.

    That's literally why I stop 2 car lengths away from someone at a stop light. I assume my car is invisible to everyone and it saved me at a stop light one time going to a car show where I darted out into the turning lane to save my trunk from a lady who was doing exactly as you said.
  18. Norman C Shibley

    Cuts out while rolling into boost

    Interesting, the previous owner installed one of those I believe. I'll add that to my list of checks....thanks
  19. Norman C Shibley

    Cuts out while rolling into boost

    PAC 1201 springs and yes that is my thought as well. I'm going to replace my MAF just as a precautionary measure for the reasons described above but that will be one of my areas of focus along with the orange ECM wire, ECM connectors, module connector and TPS. Does someone make some sort of...
  20. Norman C Shibley

    Documentory called "Black Air"

    Uh oh, hope I didn't hurt your feelings or offend in any way. Can never be too sure nowadays.
Top