Search results

  1. deleonl

    Factory and aftermarket parts for sale

    Had some extra time to put a list together of parts I have in storage. All parts are plus shipping and paypal fees. Let me know if you have any questions. Factory speedo rear housing have three - $5 each Factory support assembly cushion part number 348080 have four - $50 for all four...
  2. deleonl

    Complete 3.8 stroker

    3.8L Buick block (249 Cubic inch) 270-Stroker 4340 billet crank (3.625) Molnar Technologies 5.960 rods Pro-Gram engineering billet main caps RJC Girdle Front cover with high volume oil pump BHJ Internal balance harmonic balancer J/W flexplate Diamond pistons with total seal rings (.20...
  3. deleonl

    Fender cover and stock rims with DRs

    Driver quality stock wheels with newer caps and tires. Front tires are 225/60/15 and rears are 255/60/15 Mickey Thomason DRs. $700 plus shipping and PP fees. I have a used full face fender cover. The cover was customized by previous owner, nothing wrong with it. The cover has two tabs that...
  4. deleonl

    1987 Buick Grand National (pics and video)

    Motor: 249 Cubic inch stroker motor 270-Stroker 4340 billet crank (3.625) Molnar Technologies 5.960 rods J/W flexplate Diamond pistons with total seal rings 1.55 scorpion roller rockers 212/212 roller cam GN1 Aluminum race ported heads GN1 72mm Throttle Body and power 6 Plenum GN1 valve covers...
  5. deleonl

    GNS DDI Dash (Digital Dash Interface)

    Letting this one go. I bought this a couple of years ago when Scot came out with this. I think I paid just over 500 bucks without the Dell tablet and wireless key board. Works great, I upgraded to the GNS GNX style dash and no longer need this set up. Comes with everything in the pic to include...
  6. deleonl

    GN1 Extreme Front Mount Intercooler

    Received this in a trade. Looking to sell, I dont need it. Has been plum for dual alky set up. One pipe has a small dent from previous owner, not a big deal still functional. Also one of the top mounts on the intercooler will need to be rethreaded. $450
  7. deleonl

    RJC Racing Rear Motor Brace

    Used but in good condition. Pulled it off becuase I went with HR motor mounts. $80 shipped
  8. deleonl

    Looking for a good tuner in San Antonio

    I recently moved to San Antonio, TX and now in need of someone that is familiar with tuning our cars. I have a stock ECM with a chip from Eric. Thanks
  9. deleonl

    Jeep Wrangler Unlimited Sahara 4x4

    2008 JKU Sahara 4WD six speed manual Some parts that were recently added: Pioneer Bluetooth radio Rough Country 2.2 Dual Steering Stabilizer Rough Country Forged Front Adjustable Track Bar (Nearly double the size of the stock track bar) – Makes driving the Jeep with 35s very easy. 20x10 Grid...
  10. deleonl

    Trans pan, MAF, Boost controler, T-Top panels, Rear end cover

    I have a full set of T-Top panels for sale. NOTE: There is damage to each panel; for example, small cracks or missing corners. Please look at the pic for details. $90.00, shipped Turbonetics boost controller, bracket was painted and controller installed for less than 50 miles before going a...
  11. deleonl

    Reprogram chip?

    I recently converted over from a LU tranny and converter to a non-lock up set up. Eric made both chips for me 93 and 93 with alky. My question is, do I or should I, send my chip back to Eric for a reprogram based on my non-lock set up and new stall.
  12. deleonl

    Turbonetics boost controller and Custom 4 inch MAF

    Turbonetics boost controller with boost gauge, bracket was painted and controller installed for less than 50 miles before going a different route. Nothing wrong with the controller, works as advertised. $100, shipped with gauge or $80 shipped without gauge Original repainted rear end cover...
  13. deleonl

    SOLD...Precision Vigilante 9.5 Multi-Disc Lock Up converter..SOLD..

    I have a Precision Vigilante 9.5 Multi-Disc Lock Up converter. The stall is 3000-3200, I purchase this from a well-known board member who owned it for 500 miles before failing a timing chain on his car. Before I purchased the converter, the original owner had the converter sent off to...
  14. deleonl

    3.5 aluminum drive shaft

    Looking for a 3.5 ds with 1350 joints.
  15. deleonl

    70mm Accufab TB and Plenum (SOLD)....

    70mm Accufab Throttle Body and Plenum, in great shape. Only reason for sale, I went with a race intake and larger TB. Comes with spacer, bolts, and IAC 45 degree. SOLD...
  16. deleonl

    Accufab polished 70mm plenum

    Accufab polished 70mm plenum. Will come with ½ inch spacer and new gasket. No issues, let me know if you have any questions. $200 shipped
  17. deleonl

    SOLD....Champion Billet Fuel Rails

    SOLD.... Champion Billet Fuel Rails for stock intake, never mounted just took out of box for picture. The only reason for sale, I purchased a race version intake that already comes with the rails. Add the full 3% for paypal fees or send as gift. $225 shipped
  18. deleonl

    SOLD.....Ported stock intake

    SOLD... I have a stock ported intake with EGR delete and some additional plumbing. The intake has a crack see pics, make a reasonable offer and consider shipping cost. PM an offer and we can go from there.
  19. deleonl

    Champion ported intake

    In need of ported intake for stock block.
  20. deleonl

    Siemens 60lb injectors and TT chip (SOLD...)

    60lb Siemens injectors and a TT chip for 93 (SOLD......)