Search results

  1. missin' 2

    Tr6 2step and power enrichment issue on sd2

    Ok. So I would need to change ve table in those areas being that I'm not in closed loop on 2step.
  2. missin' 2

    SD2/Powerlogger Pro general discussion

    Anyone know if I change cell 4 on the data screen to 110 from 097, it should still correct to 11 afr at wot instead of using the afr table. Am I correct?
  3. missin' 2

    Tr6 2step and power enrichment issue on sd2

    No alky. Running e85.
  4. missin' 2

    Tr6 2step and power enrichment issue on sd2

    Wondering if there is anything I can do to keep from going into PE while on the 2step. Got it set for 3000 rpm. If I go on the 2step and load it up, I need to keep the throttle so it's just past the point where rpm is limited. If I go any further with the pedal, it starts popping( almost like...
  5. missin' 2

    Right clicking on powerlogger sd2 charts.

    Been out of the powerlogger game for a while. What does the right click feature do on the ve spark and afr charts? This is new to me. Thanks
  6. missin' 2

    200r4 tranny help.

    It started as a slight slide into 2nd then progressively got worse where the shift into 2nd wasn't a solid shift it was kind of smooth and over reved a little then settled into 2nd. Now no 2nd at all. Sent from my SCH-I545 using Tapatalk
  7. missin' 2

    200r4 tranny help.

    My dads gn just lost 2nd gear. You need to get the rpm up to around 4000 then it will shift but if finds its way to 3rd and skips 2nd. What am I looking for to verify and what will fix it. Thanks. Sent from my SCH-I545 using Tapatalk
  8. missin' 2

    Safecraft Fire Suppression System

    Pm sent Sent from my SCH-I545 using Tapatalk
  9. missin' 2

    Thinking about a 6766 turbo . Is it too big ????

    Probably going with 6265 w/.63 hotside. (Whatever you have for a housing). 17 or 18 blade? Sent from my SCH-I545 using Tapatalk
  10. missin' 2

    Thinking about a 6766 turbo . Is it too big ????

    Ptc 18? Would that work well with the 6265 or 6466? Sent from my SCH-I545 using Tapatalk
  11. missin' 2

    Looking at PT6262, Full Throttle, 10% off sale

    How much? Sent from my SCH-I545 using Tapatalk
  12. missin' 2

    Headers and turbo for 86/87 buick

    500 for both or 500 each? Sent from my SCH-I545 using Tapatalk
  13. missin' 2

    TT SD chip for sale

    If it's free I'll take it[emoji1]. Sent from my SCH-I545 using Tapatalk
  14. missin' 2

    SD2 E85 Tuning Help Central Illinois

    SD2 does in fact use the stock 02. there is a feature called narrow band tracking. Any time your target AFR is between 14.6 and 14.8, the PL will close the loop with the stock O2, instead of the wideband.
  15. missin' 2

    E85 Content Analyzer?

    From what I see in your sig. the only thing you would benefit from with the sensor is to get the ethanol content read out on the gauge. then you would just use that info to make adjustments to your tune through the chip. the sd2 will add or subtract fuel, timing and boost duty cycle based on the...
  16. missin' 2

    Billet main caps with ARP hardware

    Where are the caps from? Sent from my SCH-I545 using Tapatalk
  17. missin' 2

    New Billet center caps and New ARP main studs

    I'll pass thanks. Sent from my SCH-I545 using Tapatalk
  18. missin' 2

    New Billet center caps and New ARP main studs

    In line sending pm in a bit. Sent from my SCH-I545 using Tapatalk
  19. missin' 2

    precision .85 a/r 3bolt p-trim exhaust housing

    At what point is it beneficial to switch to .85? Sent from my SCH-I545 using Tapatalk
  20. missin' 2

    AEM E85 sensor with AN fittings

    Same here. I liked the mounting tabs. Sent from my SCH-I545 using Tapatalk
Top