Search results

  1. Lockman

    VSS Location ?

    I just read through a TSM on my 700R4 and I did not find a mention of the VSS ? Does anyone know where it is Located ?
  2. Lockman

    VSS on a 1982 700R4 with a digital dash ?

    Is the VSS Sensor the same for the above as it would be for an Analog ?
  3. Lockman

    Educate me , Please, on Data

    Took this ' Still ' shot today. Integrator & BLM have been very Low for a while. The O2 & Cross count cycle timely & all the way thru their scales. The Engine speed always goes up ~ 100 RPM , when I plug into the ALDL. My question is on the Load ? It's idling , in Park , with all accessories...
  4. Lockman

    Happy Father's Day.....

    ......You 'Ol Bastards 👴 ....Richie
  5. Lockman

    Good Ground at ICM Bracket ?

    I was researching here about Checking & resetting my cam sensor . I came across a mention of the ground Between the studs of the ICM & the Bracket being compromised , particularly if the Bracket is Painted ? Any one ever hear of this as a potential problem? Here's a Pic of mine....Powder...
  6. Lockman

    NOS GM cam sensor cap still available?

    Hello Anthony, Could you , by Chance , be able to still sell me one? I realize that this offer was 2 years ago...... But I reckon ed I'd inquire ? Thank you kindly My Friend, ....Richie
  7. Lockman

    1984 Air horn assembly - Plus some

    Off'n a 17K mile engine . $160 + $30 Shipping . It's not the weight , it's the Size that matters ( She Said )
  8. Lockman

    OEM Valve covers & Oil Fill Cap

    Off of a 17K , '84 engine . I'm think'n $ 60 + the typical $ 20 shipping.
  9. Lockman

    TR6 / Stock Ignition Module Billet Mounting Plates On Sale!

    I realize this is an older ad, but do you still supply these?
  10. Lockman

    '84 Ignition Module connections

    Need a little help here. I 'm starting to put together a couple of OEM coil packs & Ignition modules that I have purchased from other members here. They are for back-up .... On the shelf. AnyHoo...... They only thing I have found here to follow is this Tech Bulliten. My question is: Are not the...
  11. Lockman

    ' 84 - '85 CCCI Parts availability

    I'm fairly sure that a lot of us have been frustrated with the scarcity of many of the discontinued electronic parts for our Hot-Airs. I've only been in this Game for about 4 years , but I finally discovered that NGK & Walker Products are marketing things such as MAF's, Control Moduals , &...
  12. Lockman

    Autometer A/F Install

    I installed this kid today on my Hybrid CJ5 / '84 Turbo 231 . After getting to closed loop warm engine idle , when I shut her down & start her back up, It stays at Rich for about thirty seconds. Then it will operate as it should ....beside's reading the O2 sensor , would this also be a function...
  13. Lockman

    1984 OEM Vapor Canister..... Made in Canada

    18K miles on it . with solenoid & mounting tabs. Rochester Products part # 17085935. Also, a never used, BN , Standard Products Vapor canister . Thinking $ 60 + the usual $ 20 Shipping.
  14. Lockman

    200 4r Monte Carlo ss or not ?

    :unsure: I pulled all of my 1K mile spark plugs ( AC R45TSX's ) . All look pretty good white / light tan , Except for # 6 . its slightly flack , black soot. I ordered NGK 6630 UR4's , per Earl Brown's reccomendations. Any way , I'll do a compression check , but I'm pretty sure that it's gonna...
  15. Lockman

    Milestone

    How difficult a job is it ? Can anyone give me a step by step how to on changing them out ? Thanks, Richie
  16. Lockman

    Improving MPG's

    Hello everybody, As some may know, I came to this forum with a unique vehicle. I have an '84 Hot Air with a 700R4 tranny in my '75 Jeep CJ5. I have learned a lot thru you guy's & have done a lot of maintenance improvements to this 17K mile, 36 Year old engine. New chip from Eric, exhaust headers...
  17. Lockman

    Cooler Inlet Air & Gas Mileage

    Hello everybody, As some may know, I came to this forum with a unique vehicle. I have an '84 Hot Air with a 700R4 tranny in my '75 Jeep CJ5. I have learned a lot thru you guy's & have done a lot of maintenance improvements to this 17K mile, 36 Year old engine. New chip from Eric, exhaust headers...
  18. Lockman

    Conversion from digital Dash to Mechanical

    Can I eliminate my digital dash & convert it to mechanical ? Any body that can steer me the right direction on this ?
  19. Lockman

    700R4 Speedo

    I want to install a mechanical speedo in place of my digital one. Can I do it easily enough ?
  20. Lockman

    Gm Posi Question

    Hey Fellah's, I'm asking your input on how your Factory Posi Rear end's hold up, especially the Drag Strip guy's ? I'd appreciate any answers from us DD er's too ! Thanks, Richie----------Lockman
Top