Search results

  1. JayC

    9-11 converter

    Im pretty sure the answer to that is yes. Its been a LONG time since Ive seen one but Im pretty sure they did.
  2. JayC

    scammer trying again

    I banned that guy already.
  3. JayC

    Philipandres3

    User has been banned.
  4. JayC

    Are all the plugs black? Did you align the cam sensor or just put it in and turn it until the...

    Are all the plugs black? Did you align the cam sensor or just put it in and turn it until the voltage dropped?
  5. JayC

    Can you check sensor values with a scan tool? Are you sure the cam sensor is in correctly? Are...

    Can you check sensor values with a scan tool? Are you sure the cam sensor is in correctly? Are you sure the cam was installed correctly?
  6. JayC

    If the injectors are new, make sure a wire didnt get pinched when you put the fuel rail back on...

    If the injectors are new, make sure a wire didnt get pinched when you put the fuel rail back on. That will cause an injector to just hang open.
  7. JayC

    T6p power plate any good?

    Thats not exactly true but okay.
  8. JayC

    Buying a bike, okay "bicycle", anyone here familiar with what's new?

    I have a zillion dollars worh of bikes in my garage. 2 Pinarellos, 2 Blues, a road tandem, couple of mountain bikes and an old steelie Schwinn I bought to restore one day. Havent ridden any of them in at least 5 years.
  9. JayC

    VSS Location ?

    Its been a while but Im pretty sure the speedo cable is in the back on the other side.
  10. JayC

    Crankshaft Sensor Install In Driveway?

    Ive always done it with plastic strips from a soda bottle. Never had any issues.
  11. JayC

    Dyna Tech Stage 3 chip

    Joe and Fred did not live close to each other so thats not surprising. Im about 99% sure Joe did his chips. There werent a lot of guys doing them back then. Just like me, a whole bunch of places sold our stuff without saying it was our stuff.
  12. JayC

    Crankshaft Sensor Install In Driveway?

    Cut a couple of strips from a plastic soda bottle and use them to set up clearances so you dont wipe out your new crank sensor.
  13. JayC

    Dyna Tech Stage 3 chip

    Im pretty sure Joe Lubrant used to do Fred's chips.
  14. JayC

    Dyna Tech Stage 3 chip

    DynOtech?
  15. JayC

    We have a new scammer! Jean88

    Literally the only hit for that phone number comes back to this thread so Im sure its like a voip app.
  16. JayC

    Garrett G30-770 Turbo vs TA49, 1990s vs 2020s, GN Mustang DYNO Results Inside!!

    I still dont think you did a fair comparison but I dont really feel like debating it. When you start changing a bunch of stuff then your numbers get skewed. You didn't just change a turbo and pick up X amount of horsepower. You changed timing, boost, probably changed the fuel curve and changed...
  17. JayC

    Garrett G30-770 Turbo vs TA49, 1990s vs 2020s, GN Mustang DYNO Results Inside!!

    You should have done an apples to apples comparison. This really proves nothing. You could have lowered the timing in the TA49 and turned the boost up more. You also had different AR housings which also makes a huge difference. Boost always makes more power than timing. Im sure the newer turbo...
  18. JayC

    Any users running the vintage Accel DFI system?

    Thats the first generation FAST system. It was sold under the Speedpro name for a little while.
  19. JayC

    Any users running the vintage Accel DFI system?

    I ran one. I liked it. Its not that hard to program if you have a wide band. It doesnt play well with low ohm injectors tho. Its not cutting edge by any stretch of the imagination but what works then still works.
  20. JayC

    YES ......... The Rumors are TRUE , WE4 & Mrs. WE4 are headed to North Carolina for relocation !!!!!!!!!!

    If you want to fight, thats only about an hour from me so let me know.
Top