Search results

  1. V

    arp main studs,head ststuds,rod bolts,NOS gm gasket set

    ARP head studs,main studs and rod bolts.They were installed on a motor but were removed shortly after,motor was never ran on the bolts.I have all the nuts bolts studs,No damage,175$ Brand new NOS OEM GM Full gasket set for the 86-87 grand national.Brought it from NOS4GN Back in 2010,250$...
  2. V

    1987 Buick Grand national ford 9'' 6 point cage Rust free roller

    1987 Buick GN ROLLER 100% RUST FREE NO RUST Florida car Moser ford 9'' with 3:73 gears(drum brakes) 12,xxx miles(sat since 1994) 6 point roll cage Auto meter gauges Late model Grand national all power options No motor,no transmission,no front bumper,no exhaust,everything else is there PARTS...
  3. V

    Front Bumper fillers OEM

    Front OEM Bumper fillers off my 87 GN,NO rips tears or cracks,Just the front driver filler got pushed in a little (see picture) It did not rip tear or crease the filler easy fix,just heat it up a little and push it out.These are OEM,The paint on them is crappy thats why they look the way they do...
  4. V


    BRAND New in the BOX GM fenders,door skins and dash,Very rare been in my fathers heated basement since the 90's.No use for them,they were never even taken out of the box. Part number on one fender 12505344 Part number on door skin 10131267 Part number on Dash box 12396694 900$ for each...
  5. V

    Rebuilt powermaster,87GN pass wheel well

    Rebuilt powermaster,never used-350$ 87 GN pass wheel well,no cracks or damage 100$ Prices are firm and Local pick up only,thanks 609 858 3588
  6. V

    87 GN 10 sec Engine rebuilt 0 miles

    Any interest In a rebuilt 10 sec 3.8 v6 LC2 engine?.All the parts listed are new: PTE 6265 turbo,212/212 CAM,60lbs injectors,ported heads,ported intake,Ported dog house,ported stock heads,Arp head studs,arp rod bolts,arp main studs,HV oil pump,EGR block off plate, taylor plug wires, accfarb fuel...
  7. V

    Steering column,Fenders,200R4,Rims,

    Parts are located in nj must be picked up cash and carry no shipping
  8. V

    Parting out Complete 87 GN Running NJ

    Parting out a complete 87 GN Runs,drives, I will not sell the car complete please do not ask. Pm,call/txt with needs I am located in NJ. Willing to trade for some Gn parts, 609 858 3588
  9. V

    Borg Warner s400 80/96mm 1.32A/R Trades new

    Borg warner/Schwitzer turbo T6(09031315-8).Brand new never even bolted up I did a ls1 swap in my Gn but ended up going with a different turbo.Turbo is a baby monster weights like 50+pounds.For my other 87gn Im looking for a PTE 6265 Turbo/ T-66 And a PTE front mount Intercooler new/used As long...
  10. V

    Looking for a Grand National roller/regal NJ NY PA

    Hey,Looking for a regal/grand national roller.I don't need the 8.5 rear,dash pad interior or anything also.Don't really want to deal with rotting/rust but body work is fine.I brought a roller on this form 6 months ago that I'm really happy with actually did a 96mm ls1 swap but yea anyone with a...
  11. V

    1998 dodge ram 1500 rebuilt 8,000 miles custom

    Im posting this add for my Brother.Its his truck. Im selling my 1998 dodge ram 1500.The truck is all redone.The motor was rebuilt new rings,rod,cam,crank bearings,everything(I have rebuild pictures) and has about 8000 miles on it since the rebuilt,the transmission was also rebuilt and only...
  12. V

    87 GN on craigslist has GNX parts

    1987 Grand National Project!!! I called the guy today,he said it has The motor/trans and rear end from A GNX.I asked him if He knew the different he said yes the GNX has the ladder bar so Im guessing its there.I didn't see it personally.Just saying what he said.Figured it might be a good car...
  13. V

    1987 Buick grand national roller 12,xxx miles ford 9'' 5000

    I just brought the car on the form less than a month ago.At the time I brought the car I had hopes and even have all the parts I got.I lived with my parents when I brought it,and unfortunately I got into a fight and moved out.Im leaving to california and I cant take the car with me.The reason I...
  14. V

    The reason I don't drive my cars anywhere

    I took my dads 87 corvette out the other night.I went to my girls house,left her house at 5 am.The next morning I noticed it.The sad part is the car only has 4000 original miles.Now Im never hearing the end of it.Im going to skin the whole quarter.Even thought its an easy job its just something...
  15. V

    Weld prostar 10'' with slick and skinny rim and tires

    Im selling a set of weld prostar rims of my GN.The rear is a 10'' rim with a mickey thompson pure slick.It looks like it only had 2-3 runs on it.The slick is bolted to the rim.The front is the skinnies with tires .No curb rash or anything.These are the pictures of the car when I brought it.I...
  16. V

    LQ4 turbo or lc2

    Hey,I need some advice.I just brought a roller GN on the form.Im on the fence between stroking the lc2 or going with a forged lq4 twin turbo.I have both engines already and I have two gtk-1000 turbonetic turbos.Im not concerned with which one is cheaper,I care more about which is more reliable...
  17. V

    Looking for a 84-87 GN roller

    Im looking to buy a GN roller No motor transmission.Local only like 100 miles or less.Thanks.NO Rust please
  18. V

    GN 5 piece spoiler 200$ Mint

    Im selling my 5 piece spoiler off my 86GN for 200.It has no cracks,chips dings or anything.225$ SHIPPED.Thanks
  19. V

    Nice project that came in yesterday.

    Took me about 4 hours to put the horns in but I think it came out pretty Good.I spent most of the time making the bracket to hold the horn.I had to use a jigsaw to cut a 1/2 piece of steel,Wasn't fun at all.All i kept thinking was I wish my tablesaw was set up.Then I ran out of the rods for the...
  20. V

    Gn rims Nj 500$ with tires

    Hey,I got a set of Original rims off my 86 Gn.4 of them are in great condition(no pitting curb rash etc with about 85% thread on the tires.One of the rims someone wire brushed the black out of the inside and it has a different tire.The other 3 haven't been touched..The problem was the owner...