Search results

  1. captrob

    Shop clean-up...Lower arms/springs/ball Joints, Cruz and stock pulleys, valve covers, big brake kit, etc.

    1) Front lower control arms with Global West delrin bushings. The arms were painted with POR-15 about 20 years ago…pretty good shape, definitely not perfect. Bushings are in great shape about 20 years old and approximately 10,000 miles. Serviced every year with quality high temp grease. $40 for...
  2. captrob

    CruzPerformance Pulley Set

    For Sale: 5 Piece Cruz Performance pulley set. Only installed, never run. Billet aluminum pulleys. I switched to black pulleys, so my fashion fickleness is your gain. Alt, Idler, water pump, power steering, and crank pulleys. $400 shipped priority mail. Lower 48 states only. PayPal...
  3. captrob

    Shop clean out - Misc extra parts

    * All used parts from ‘86/’87 Turbo Regals * All are plus shipping * Pick-up or shipped from Keller, TX. 76248 * Paypal F&F or add 3% please. * Ship only to CON-US of course. Anywhere else extra * - Stock throttle body-Bored 62mm by Jay Jackson years ago. No coolant hose nipples. No IAC, TPS...
  4. captrob

    Misc. Parts - Shop cleanout

    Miscellaneous Parts – Shop Cleanout * 3” LT1 MAF end pieces… Just the ends, no MAF sensor……$5 * 3.5” LS Maf end pieces. ... Just the ends, no MAF sensor…....$5 * Stock passenger header…#6 tube to flange needs rewelded. This header flange was ported to gasket match and was cut open and...
  5. captrob

    Lose some weight - Super lightweight headlights

    1 set of 4 plastic headlights long since extinct and hard to find. Probably at least 15 years old, but hardly any ON time. They are crystal clear and work great. Saves almost 10 pounds off the front for you calorie counters. 2 lowbeam Wagner HP4656 2 highbeam Wagner HP4651 Still have the...
  6. captrob

    Bowling Green Customs Intake -SOLD

    SOLD - I have a BGC off center intake that came with a motor and I do not need it. Complete lower, upper, fuel rails, and crossover hose. - Stock style regulator mount. - New stainless allen-head hardware. - No stripped holes. - Ports are cleaned up to stock intake gasket(96033) - Upper...
  7. captrob

    Max-effort,MAF Translator, LS1 MAF

    Changed the combo over the winter... MaxEffort - 16 position, MAF version, 55 injectors...$200 shipped MAF Translator - original version. Wires were cut to install in my buick hybrid...$100 shipped LS1 MAF - 3.5", great condition, screen...
  8. captrob

    Direct Scan version 1.52

    *LIKE NEW* - Just had the board replaced by Kent Chu. All cables, manual, disks included. $130 shipped to you. Thanks, Rob
  9. captrob

    (Not)the biggest parts list ever...86 T-Type part out

    Parting out salvage title ’86 T-Type 110,000 miles Maroon exterior, Grey interior Prices don’t include shipping unless specified. I don’t “jack up” charges. Reasonable offers always accepted / negotiable. Package deals are encouraged. Thanks, Rob Pahl Keller Tx
  10. captrob

    Powerstroke Intercooler...$200 shipped

    Powerstroke intercooler - aluminum tanks, a few small dings and bent fins, but doesn't affect performance. No leaks. No pipes, clamps, or couplers included. I bought for a hybrid project and decided to go another direction. Huge! Lots of TR's making these work. Not just a drop-in, but there...
  11. captrob

    Maf plus Translator...$200+

    *3.5" MAF...good shape, no screens. Have 3" ends to go with it too. *Original Translator...good shape, installed inside, worked great. Had as a blow thru setup. Upgrading need to sell. $200 plus shipping. Thanks, Rob
  12. captrob

    Amsoil re-usable foam Stock air filter

    For the "Stockers" Have an Amsoil foam air filter for the stock airbox on the 86/87 turbo motor. Was on my "stock" GN for about 2 years about 500 miles. Almost NEW. Still really clean and oiled. If you're still stock and want a free flowing, re-usable filter then this is for you! Just...
  13. captrob

    Barely Used Bilstein shocks

    !!!!!HALF PRICE SALE!!!!! Improve the handling of your GN or T. >Full set of Bilstein shocks. P/N's B36-0949 & B46-0929. Great shape. Might want to replace the rubbers on fronts. Only 2000 miles on them. Installed them 2 years ago. You can see them here...
  14. captrob

    Repair of Header/Crossover flange

    Any way to reliably repair the ball flange on a header? Crossover is new so I know it's flange is round, but the header ball is flattened out. Want to repair this set if I can cause it's port matched and smoothed inside. Thanks for the help. Rob
  15. captrob

    Direct scan shows 3rd gear...

    at all times. Haven't been to 4th yet since rebuild to see if that one is working. Anyway to get it unstuck without pulling pan? Thanks, Rob
  16. captrob

    Battery/alt. cutoff switch...

    Which wire off of the alternator do I have to interupt to shut the car down? The large gauge wire or the brown field wire? Just trying to finish up this birdsnest that I have. Thanks, Rob
  17. captrob

    Wanted...Set of T-Type wheels...

    Anyone have a set of descent condition T-Type wheels? Not looking for show quality, just a fair set w/tires if possible. Looking in the Dallas/Ft.Worth area, but will drive to come get them. Let me know. Thanks, Rob
  18. captrob

    Aftermarket TV cable...

    Anyone had good luck with non-GM TV cable? I'm thinking I need to go genuine, but if there are no problems running the aftermarket one I'll go that way. Thanks, Rob
  19. captrob

    What size trans cooler lines?

    200-4R with finned cooler in front of the radiator. What size lines should I use for a tranny cooler? Is -6AN large enough or should I go to -8AN? Thanks, Rob
  20. captrob

    Question on trans yoke...

    I've seen two different length of yoke for the 200 4R trany.(4.5 and 5 inch long) Is the longer one needed, and does it give any more safety/strength over the shorter one? Thanks, Rob