Search results

  1. B

    What wire and connector is this (fuse box).

    I believe it acts as a filter so your radio doesn't pick up electrical noise. You know that whir you here over the speakers in cars that changes with engine rpm? That.
  2. B

    pop at mid to full throttle

    I agree this could be a fuel starvation issue.
  3. B

    This is what happens when you set bearing clearances right

    Keep in mind, oil pressure is nice but not the whole deal. If you plug the cam feed you could have 1000+ psi! Flow is just as,if not more, important. Sent from my iPhone using Tapatalk
  4. B

    Shipping a vehicle

    Have you looked at Sent from my iPhone using Tapatalk
  5. B

    First time building a GN motor.... Need help

    That was the idea! Sent from my iPhone using Tapatalk
  6. B

    First time building a GN motor.... Need help

    Not to mention giving up cooling of your bearings by virtue of reduced volume of oil being moved across them.
  7. B

    First time building a GN motor.... Need help

    Another thing to do would be to see if you can find anyone that knows how to mod the front cover for improved oil flow. There used to be a DIY write up from a guy named earl around...some searching may yield that. I built my last motor a little looser than some (around .023/.023 if I remember...
  8. B

    No Start

    You could also take a hot wire down and use it to activate the solinoid. If nothing happens you have a good idea of whats wrong. If it does activate you should use a meter and just follow the circuit back looking for 12VDC when you hit the key.
  9. B

    87 gn

    Havelock, nc 28532
  10. B

    87 gn

    Havelock, nc 28532
  11. B

    Brf trans core

    Yeah, it's about 200 miles. I'm heading out of town but could meet part way sometime when I get back. Ill be back feb 4. Sent from my iPhone using Tapatalk
  12. B

    Brf trans core

    Any offers? Sent from my iPhone using Tapatalk
  13. B

    Brf trans core

    If you set up shipping ill ship it. Hard parts should be fine but stock. Worked when removed just had soft shifts and a flare.
  14. B

    Brf trans core

    Was rebuilt by Ammco. Enough said! Lol I'd like $300 for it. James Feel free to text 619 three six eight 2538 I'm in havelock nc. Sent from my iPhone using Tapatalk
  15. B

    87 gn

    Lets start at $7000. Frame is good. Yes rockers window channels and some floorboards are gone. Ill get pics up tonight.
  16. B

    87 gn

    Ok here is the deal. I have a 1987 Buick grand national for sale. It is LOADED with performance parts but the body is pretty well gone. Mechanically speaking its in excellent condition. Parts include the following. Less than 1500 miles on rebuild engine and trans. Engine is .020 with speed pro...
  17. B

    no fuel pump with ingition

    I don't have my schematics right here. Did you follow the above trouble shooting tree from the beginning?
  18. B


    If u suspect a bad coil ohm out the secondary (across the towers) and it should be around 12.7 k ohms iirc. Coils are pretty durable and while that doesn't check the primary i think the secondary is where most problems will show up when a coil is bad. Allot of times it will get worse as it gets...
  19. B

    1987 turbo buick regal roller

    If this falls through please let me know.
  20. B

    Rear Wheel offset

    I'll check when I get back. The possibility exists I'm wrong about the width but I'm pretty sure and I just measure BS two days ago. Like I said though I'll check. I am after all human and subject to mistakes.