Search results

  1. J

    Fuel pump block off plate

    Is it the same as a sbc? Also the cam sensor hold down can I just use a distributor clamp from a sbc?
  2. J

    Cruz headers

    Anybody use them? Thinking about picking up a set of his race headers with a T5 flange and egt bungs. Looks like a nice set and definitely cheaper than having a set made. Just looking for some feedback.
  3. J

    Jw flywheel question

    I'm installing a jw flywheel on a eagle crank and 2 of the mounting holes are slightly off. I was just going to open them up a tad with a grinder. Anyone ever run into this? Just curious.
  4. J

    220lb injectors

    Anyone know a vendor that has them? Seems there getting very hard to find ones that will fit a champion intake and fuel rails.
  5. J

    Cam plug in ta block

    What type of sealent do you guys like to use?
  6. J

    Champion intake question

    Going to be running felpro 1200 intake gaskets and the gn1 alluminum valley cover. Will be running breather lines to a catch can off of the valve covers. I'm assuming I can just plug the hole in the bottom of the intake where the pcv would go correct? Technically I wouldn't really even have to...
  7. J

    Holley dominator cam & crank signal

    Installing a dominator system on my car. My question is I'm assuming I can run the factory cam and crank sensor correct? Is there a certain brand senor you guys prefer to run? Where can I purchase both crank and complete cam sensor with cap and where can I get pigtails for both to wire them in...
  8. J

    Dark screen problem

    When I click on a thread the screen is dark. The Google chrome poos up at the bottom . If I click on it all I get is other website options. Using my phone, anyone know how to fix this.
  9. J

    Eagle crankshaft question

    My eagle crank came with the keyway already installed, using a rollmaster timing chain and the height of the keyway is maybe only halph of the slot on the crank gear. Has anyone seen this issue before and had problems with it? I would definitely be more comfortable with more engagement on the...
  10. J

    Cam install ta block

    Installing a crower solid roller in a ta block. First time working with one of these blocks and have a few questions on the front set up. The cam retainer plate that bolts to the front of the block does anyone know a torque spec? Then I have the spacer and drive gear, what orientation do they go...
  11. J

    Rod bolt stretch

    Arp 2000 rod bolts. Spec is max .0064 stretch. I came in at .007 on two of them. Would you back them off and seek up on the spec? Or would you be comfortable with .007? I'm thinking there could be a lot of human variables when taking measurements.
  12. J

    Off center connecting rod installation.

    Correct me if I'm wrong but when installing a off center rod either stock 2 dot or aftermarket forged piece. The bearing thangs face the pan rail and the offset of the rod will always be facing the counterweight of the crankshaft. Is this correct?
  13. J

    Turbo regal drag car

    Prefer no engine. Have cash
  14. J

    Pushrod questions

    Wanting to get opinions on the correct way to measure for Pushrod length. What checker do you use and how you do it. For adjustable rockers and stock rockers. Thanks in advance.
  15. J

    Front upper control arm

    Looking for pretty much just a stock replacement. Is there a brand that you prefer?
  16. J

    Ta block

    Is there some where that I can get a ton of information on to what goes in to building a ta aluminum block engine? As far as machining and assemble processes
  17. J

    Witch wideband?

    Haven't had to buy one in a while and was wondering if there are any new ones out that you prefer and why.
  18. J

    time to upgrade need sugestions

    So I have a 50,000 mile 87 gn in nice shape. Upgrades so far are hot wire kit with upgraded fuel pump, pypes exhaust no cat tt chip with stock injectors. cai and timing chain upgrade along with gauges and scanmaster. Car runs very well and I was planning on just using the stock turbo to its...
  19. J

    adjusting tv cable

    I want a little firmer shift going into second. Would I go a notch towards the front of the car or a notch towards the back of the car?
  20. J

    ccci fuse blow

    So if I drive my car 20 to 30 minutes the ten amp ccci fuse blows. Can anyone show me a schematic for this circuit or give me a little information about it? Have any of you had a problem like this before? I did just put a new ignition coil on it it fixed my running problem but now this is...
Top