Search results

  1. GNICETRY

    Wanted: Black Cars Matter T-Shirt (Size XL)

    Wow they have some good stuff. Has anyone bought any merch from them?
  2. GNICETRY

    gmp fact or fiction 87 buick for sale

    I'll take the Fact or Fiction model if Jonasterg doesn't.
  3. GNICETRY

    Battery question

    The older Optimas are better than the new ones. Not sure what year they made the change
  4. GNICETRY

    TPS Issues

    Cleaned the connectors and ECM prongs with small brush and specialty file. ECM connectors went on way more smoothly. Almost couldn't get them off before. Now get malfunction codes 15 and 23, MAT and Coolant Temp. And when I move the ECM TPS goes crazy. So I am leaning toward a ground issue or...
  5. GNICETRY

    TPS Issues

    Any ECM experts have any opinions?
  6. GNICETRY

    TPS Issues

    ECM looks good to me
  7. GNICETRY

    TPS Issues

  8. GNICETRY

    TPS Issues

    ECM connectors. Opinions?
  9. GNICETRY

    TPS Issues

    Coolant temp is true. No flucuation.
  10. GNICETRY

    TPS Issues

    With engine running the TPS fluctuates from .38 to.48 in.02 increments WITHOUT touching the ECM wires. Moving the ECM- nothing changed did the same thing. Also when I tapped into the grey/black wire at TPS (plugged in) voltage was 3.8-4.1
  11. GNICETRY

    TPS Issues

    Still working on an IAC/TPS/idle issue but in general car runs good. No missing, no hesitation. Just TPS jumping around when I drive. It was set to .42 then for no reason fluctuates to .30, .58. .48, etc. My idle is a little high but again working on tracing everything down. New GM TPS and...
  12. GNICETRY

    TPS Issues

    Further troubleshooting
  13. GNICETRY

    TPS Issues

    Key on,, engine off Grey/black wire (top one) piercing it =5.07 V Grey/black wire on top prong =5.07V On the video this is constant. When I did this test numerous times both of those numbers were constant but WAY LOWER than 5.07 like 3.4 Black ground is not 0, but .05 Should I be concerned with...
  14. GNICETRY

    Alternator upgrade

    Part#102111 is with the upgraded 6 gauge wire! http://www.casperselectronics.com/cart/index.php?route=product/product&product_id=71&search=battery+cable&description=true
  15. GNICETRY

    IAC Angle boss install

    Thank you. I just did snug plus a little. Either way they are on tighter now than when I took them off. Now to adjust idle/TPS/min air screw. Fun fun!!
  16. GNICETRY

    Alternator upgrade

    Alternator is in. Went well with the exception that the back smaller bracket that forks with the front one didn't line up. Doesn't seem to be too big of an issue and I am going to run it without it as people on here have done.
  17. GNICETRY

    IAC Angle boss install

    Thank you guys so much. TB HAD to come off NO WAY install without removing it. Blocked the coolant lines off too. Not pretty but works.
  18. GNICETRY

    Anyone ever use the spohn Pro-Series-Rear-Drag-Sway-Bar ???

    He didn't say the HR bar helped your 60ft time. He asked you hence the "?" after 60. We get it you don't like it because it does what it is supposed to do, less fun. OK. No problem that is subjective BTW. But to help people out did it lower your 60' time?
  19. GNICETRY

    Taking my first long trip - and of course I’m nervous

    Might want to check if your driveshaft is true. And U joints (I know you did) or even rear carrier. Also you HAVE to work on your coolant temps. They are too high and you have an issue somewhere.
  20. GNICETRY

    IAC Angle boss install

    So triple checking everything before I button it up and noticed that the throttle body blade isn't straight, its on an angle. I thought it was straight when I took it off, but maybe it wasn't. I didn't really drop it or manhandle it. Took a pic with a flashlight in the back. Should I be concerned?
Top