Search results

  1. fitz3820

    Boost Flutter?

    I installed the tornado and it does work - crazy but it made the car 98% more smooth during part throttle acceleration
  2. fitz3820

    spools fillers

    Any deals on shipping? It is usually $75+
  3. fitz3820

    valve cover leak or?

    My oil pan was leaking on the crossover pipe, check that as well. If your engine is dirty, it might help to degrease it before you add in the dye but as was said before, the dye will show the leak quickly
  4. fitz3820

    Cam Sensor Removal

    I tape the bolt to the socket with duct tape to get the bolt back in, it can be a pain
  5. fitz3820

    Weld up drivers side header

    I 2nd Cottons, Brian did mine, he has probably done hundreds :) Sent from my SAMSUNG-SM-G891A using Tapatalk
  6. fitz3820

    Door Hinge Bushings - remove hinges?

    Thanks for the replies - I will have to figure out a way to support the passenger door without support from the hinge like in the video above. I was doing one pin at a time. Maybe this...
  7. fitz3820

    Door Hinge Bushings - remove hinges?

    Hello All, Is there a way to replace the door hinge bushings without removing the hinge from the car or the door? The thread that Richard Clark posted in said that you can but I do not see how. I did the driver's side last week I cut the pin but had to unbolt the hinge from the door. and it...
  8. fitz3820

    air conditioner motor won't shut off...

    99% chance it is the power antenna. There is connector you can unplug under the hood that you can unplug. Sent from my SAMSUNG-SM-G891A using Tapatalk
  9. fitz3820

    86 GN Grill

    Oops, I thought the OP posted the pic, my bad Sent from my XT1254 using Tapatalk
  10. fitz3820

    86 GN Grill

    Looks correct to me. The 87 grill has no chrome at all Sent from my XT1254 using Tapatalk
  11. fitz3820

    T-Top handel Rattle fix

    I used plastic washers behind the handle Sent from my XT1254 using Tapatalk
  12. fitz3820

    Trans cooler lines

    I did it with the motor installed, make sure they don't vibrate together and cause a leak. Sent from my XT1254 using Tapatalk
  13. fitz3820

    Powder coated bumpers

    Mine matched the factory paint well, the shop I went to had about 5 shades of black to choose from Sent from my XT1254 using Tapatalk
  14. fitz3820

    Powder coated bumpers

    Mine turned out great, no chips or marks for 3 years. Sorry, no pics, car is in storage Sent from my XT1254 using Tapatalk
  15. fitz3820

    Starting T-Type After LONG Term Storage

    Yes, prime the pump, mine loses prime over the winter storage. Prime it, crank the motor over by hand to get oil to all bearing surfaces. Run for a few minutes and change the oil. Sent from my XT1254 using Tapatalk
  16. fitz3820

    Front sway bar mount holes stripped out

    I slid a nut into the frame, duct taped it to a wrench and used cap screws to fasten them - works like a champ.
  17. fitz3820

    Scanmaster vs Scanmaster 2.1?

    I have the old one as well, no O2 cross-counts and the display is a bit dim but it works for me. You can upgrade if going the power logger route. I like the new scanmaster gauge if I ever upgrade
  18. fitz3820

    Say hello to the new Regal

    I like it - might replace my wife's 2011 Regal Turbo
  19. fitz3820

    Porting a stock throttle body and dog house

    Steve did mine last year, fast turnaround, looked brand new when returned Sent from my XT1254 using Tapatalk
  20. fitz3820

    Can someone check on Charlie?

    RIP, such a large presence on this board Sent from my XT1254 using Tapatalk
Top