Search results

  1. Kyleh24

    GNX 241 or 411

    If anyone here has either of these 2 numbers, i have a license plate you might want. Not looking to make a profit, I bought them when I saw them.
  2. Kyleh24

    Jeep steering shaft

    PM coming. 1st in line. Thanks
  3. Kyleh24

    bait car

    I call them "J A M" Just Another Mustang
  4. Kyleh24

    Do I need to upgrade my turbotweak chip

    I sure wish someone else would chime in here. I am a novice, but I have learned that when you change anything that affects your air or your fuel, odds are your chip won't be right. That is exactly why Eric at TurboTweak asks you those questions about your set up. Unless you have an SD2 chip...
  5. Kyleh24

    Do I need to upgrade my turbotweak chip

    If you added alky since getting the chip, I am certain you need your chip adjusted.
  6. Kyleh24

    Duttweiler neck intercooler

    PM Sent. I want it.
  7. Kyleh24

    Better than stock Intercooler wanted

    Am looking for a good stretched stock location intercooler that is in good shape. Don't want to pay as much as a new one .
  8. Kyleh24

    Looking for steering gearbox for 87 gn

    Kirbins. Part 7380. $165
  9. Kyleh24

    Factory 86 chip

    Thanks for the replies. I put in a TT chip that is for stock (except a TA49, which only Eric can tell me if there's any difference) I still get lean dipping below 750, but much later inthe pedal. I bought 42's and a TT chip from a fellow member, and so I will get the upgraded fuel pump and...
  10. Kyleh24

    42lb injectors and TT chip

    Not trying to answer for him, but I bought both.
  11. Kyleh24

    42lb injectors and TT chip

    PM sent
  12. Kyleh24

    Factory 86 chip

    Looking for info on a Delco ATH chip from a 86 GN. I can't see the number due to the plastic carrier. Google didn't help. So my 86 is stock except for a few things: brakes, rear seat brace, fuel hot wire kit. The car is in very good shape for stock (and I would like to keep it that way as much...
  13. Kyleh24

    The Problem, How To Solve It? Help TurboBuick.com

    This was my first time going to the event. We had a great time. I didn't get to visit Richards garage for long enough, but did get through there before the rain on Friday. I loved the action at the track. I was able to hang out with several other cool folks from Georgia and met some really...
  14. Kyleh24

    Misc. brand new and used parts- TRZ,Spohn,Cruz,Lorenz,Scanmaster

    I'll take the scanmaster. text sent
  15. Kyleh24

    Misc. brand new and used parts- TRZ,Spohn,Cruz,Lorenz,Scanmaster

    Want scanmaster if it is 2.1. Will call on Tuesday. Thanks
  16. Kyleh24

    Exhaust ?

    When I tried this one with a test pipe, the difference was awesome and sounded good too. https://www.summitracing.com/parts/pye-sgg50s
  17. Kyleh24

    Powerlogger file review, Knock

    Idle is rougher than stock. Also seems to feel like it is surging when I coast, more like in the tranny but could be otherwise. Factory MAF. Anything stand out on the log file?
  18. Kyleh24

    Powerlogger file review, Knock

    OK, I am back. Here is a new log file. A small bump of knock in one spot. I have had spring cleaning: wires, plugs, hot wire, new pump, new 60lb injectors w TT chip. See above for other options. Inj PW is now only ~50% instead of 100. Volts are ~.830s to 840s on wot. have not adjusted...
  19. Kyleh24

    Powerlogger file review, Knock

    Hello men, Thanks for the replies. I looked back at the spring cleaning post and ordered plugs and wires etc. I know my tps only shows 4.0 v at wot, so I will adjust or replace. I will repost once these are done as well as the fuel pump, wiring and fuel filter are done. Hopefully I can help...
Top