Search results

  1. Speed Demon

    LED Side Marker Light Issue After Replacing Flashers, Relays??

    Have you tried the load resistor kit from I've been looking to attempt this also but haven't yet but from reading I see you can add a resistor across the circuit. Here is their kit and flasher LED Turn Signals Blinking Too Fast (Hyperflashing) - Super Bright LEDs
  2. Speed Demon

    Looking for jeep steering shaft

    I got mine at mikes montes Upgraded Refurbished Used Lower Steering Shaft-23
  3. Speed Demon

    Bosch 237 Regulator

    I have a 233 adjustable that worked fine when i upgraded to a billet one pm me if you need more pics...I can text or email them
  4. Speed Demon

    D5 converter

    PM sent
  5. Speed Demon

    Want to Buy Turbo Tweak chip for bone stock GN

    I have one for stock injectors with 91 octane. I also have a set of stock replacement bosch injectors with a few hundred miles on them. PM me an email or number I can send pics if needed.
  6. Speed Demon

    Big Parts List, June 2020, tons of used and New parts

    Email sent Sfi turbo hood emblems 86 throttle body no sensors needed Black trunk molding if you have it Dash pad
  7. Speed Demon

    AC compressor install pics needed

    Sent pics. Yeah can't upload anything was able to before?
  8. Speed Demon

    AC compressor install pics needed

    I tried uploading some pics but it says they are too large for server I don't know how to shrink them? Send me an email at and I can reply with them.
  9. Speed Demon

    Anyone ever try to paint the ratty looking firewall

    I originally did the top part of firewall while engine was in with the Technic like Twin Turbo suggested then when the motor was out I did the rest. I would recommend using Satin black it has a little less sheen than semi-gloss. Also if your plastic fender wells look kinda brown, spray some No...
  10. Speed Demon

    255/50/16 Drag Radials

    I have same issue my buddies recommend these mickey thompson et street s/s using same size. I didn't get them yet to rate them but here ya go
  11. Speed Demon


    I use these with good success. Just tap the wire behind.
  12. Speed Demon

    Has anyone used this Alternator??

    I agree with earl if you're gonna run 200 amp alt. you should upgrade wiring. I am using a battery extender kit from Casper's rated at 200 amps and upgraded all grounds to 4 ga. (I know overkill) All the fusable links are replaced and moved from the starter to the inner fender with this kit...
  13. Speed Demon

    Has anyone used this Alternator??

    I tried Kirbans 200 amp but it didn't perform well at idle with the stock size pulley running ac and dual fans etc. I ended up going with this...
  14. Speed Demon

    Plastic Washers

    Forgot to mention this worked with an Acdelco compressor.
  15. Speed Demon

    Plastic Washers

    It sounds like you might be looking for the seals. Here is the kit You want to use the green and yellow(gold) ones and the smaller line extension on...
  16. Speed Demon

    Alternator whoas

    I had same problem. Took alternator to a rebuild shop and it tested good reinstalled and still wouldn't charge. Removed field fix no help (my dash light worked though). Installed my original (bad bearing) but it charged fine. Call shop and asked him what could be wrong and he determined he was...
  17. Speed Demon

    Jeep Steering Shaft

    Mikes Montes site has them also. That's where I got mine. Works fine. $109 not sure what shipping is?
  18. Speed Demon

    TA Valve covers

    Interested also if not sold.
  19. Speed Demon

    Casper Dual Fan Conversion Harness

    Harness shipped. PM sent with tracking.
  20. Speed Demon

    Casper Dual Fan Conversion Harness

    I've got one. I also added delay module so second fan starts a few seconds later. Make offer. Only used few hundred miles going to car shows last year. PM me if interested. Thanks Nick