Search results

  1. Clark6

    TR6 tach signal

    Yes I saw the Correction feature as an option also but since you didn't have the rpm signal I was throwing the sensitivity feature out there as well... Hope you get it going how much boost you trying to work with? make sure you have no leaks also
  2. Clark6

    TR6 tach signal

    I need this signal for my turbosmart boost controller to try to control the boost falloff above 4500 rpm. I tried this several years ago with stock ignition with no luck. I have the TurboSmart Eboost street 30 .. instructions say try this: 3) Sensitivity (SN1/SN2): The sensitivity is how...
  3. Clark6

    Fuel pressure not increasing in boost?

    td do you have good connections & new wiring & connectors back there to the pump? I wonder if you can monitor voltage with powerlogger on a pull to see if the voltage is going down the faster you go.hmmmmm
  4. Clark6

    Fuel pressure not increasing in boost?

    60lb.i see now ,,,I had this problem 2 weeks ago... I have 80lbs inj. with a Supra pump... wasnt going past 53 fuel psi at 20 boost... I decided turn up the boost a pump to 15volts. walaa.. problem solved.
  5. Clark6

    This thing smokes under full boost only

    Man Cryptic,, exactly 12 days ago as I was inching up in boost mine start pushing oil out the breather grommet lip... I've had them installed upside down all these years. I went & bought some new grommets,(just like yours, installed the correct way slapped on some new breathers Oil came out the...
  6. Clark6

    Converter to Flexplate Gap

    Wow TType I have a JW flexplate as well Over the years ive broken 2 rotors. I assumed i didn't have the correct washers in , the first time i used no washers. 2nd time i did ,,years ago. Then I put a billet rotor in,, haven't broken another but I just pulled a pump & had Mikestertwo check it...
  7. Clark6

    Converter to Flexplate Gap

    http://www.taperformance.com/PDF/Converter_Instructions.pdf 5/64-1/8 <<<Maybe THIS<<< Is for GM measurements only according to PATC So you maybe Exactly right guys.) Hughes converters shows 1/8-3/16 however.
  8. Clark6

    Heavy duty shifter Cable from Mikes Montes install ; works perfect.

    Perfect !! Now I went through all the gears, t brake, slapping it slightly in 3rd from Low 1. All gears work great. (j-rod hung up a few times but I think its that springs fault.. ) but worked good & ok so far while installed in the car. Been driving since the first of April. Here's what mine...
  9. Clark6

    Heavy duty shifter Cable from Mikes Montes install ; works perfect.

    14) Here is the Adjustment part go ahead & put it in LOW 1 & make sure the adjustment looks good & tight. 15) Should look like this when done good & tight we will come back here to fine tune shortly.. 16) I comes with a large & med. C clip.. the large one goes here so go ahead & connect...
  10. Clark6

    Heavy duty shifter Cable from Mikes Montes install ; works perfect.

    9) As you can see it wont fit I thought about this route but look at how thin the bracket part is didn't want to gouge nothing So I took the Dremel & went this route about 3 quick rounds twice It fits. 10) . Now put the other adjustment connector back on then reattach cable. 11) Snug it up...
  11. Clark6

    Heavy duty shifter Cable from Mikes Montes install ; works perfect.

    Hello Fellow Buick owners. I just wanted to post a detailed shifter cable install since the final one I installed from High Way Stars broke after a year of use for me..That one fit perfect by the way.. I had it in a bag in the house in a top drawer still in the bag & installed it year ago...
  12. Clark6

    Stroker Kit

    I went with 5.960 rods as well,,, I think my compression is 8.645 mine wasn't coming from stock though more like lo 12s with items in my sig 10s was easy. at 24 psi boost.
  13. Clark6

    Question on radiators

    No A.C here,, no condenser. Ride mostly with windows down when not too hot. lol. I have the Stock fan/hi speed relay-- Same F-body radiator,,,Same water pump all bought new in 09... & same Evans engine coolant with another gallon added in 2012 cuz my fan blade cut the top hose & had to...
  14. Clark6

    New Knock / Suspecting Fueling Issues

    yes my recent problem like this was the Ground wires back to the gas tank was corroded. Also missed a ground back at the ECM for the fp relay. I added 2 grounds one to the gas tank one coming off the plug for the fp going into the gas tank. Supra pump still goin.
  15. Clark6

    Throttle cable for an 87 buick gn HELP!!!

    The $15 one on ebay for a 700r4. its ugly & almost a hastle because of the long stem but it works fine. I cut the stem end off. part no. K65552 made by Tekpack.. it will work in a pinch. Oh Im sorry disregard my post.. my cable doesn't look like the picture above I'm sorry I was...
  16. Clark6

    Throttle cable for an 87 buick gn HELP!!!

    I bought the 1st one from Lonnie Diers, bought the 2nd 1 for another car from Hiway Stars, bought the last one in a pinch off ebay just a generic 200r cable.. All 3 still work in 3 different cars. just have to do some serious adjustments with the longer cable,, kinda looks like the 3rd pic of...
  17. Clark6

    Methanol ( M1) test kit results

    I use this, I make sure the spout is on & bottomed out tight on the neck of jug , (if not it will leak when you release the spout), Practice with it you will perfect it......….when finished I pull spout off & put back in Ziplock bag. & cover the whole container & spout with an old but new...
  18. Clark6

    when to change alky filter in PAC?

    Very True berserk,,,,,, however I think I found the problem... It was the check valve as I suspected. Prime with green light & fluid must have bled down from ChkValve… I pulled apart,,, examined the spring... It was collapsed. so I just stretched it twice & put back all is well now thx...
  19. Clark6

    when to change alky filter in PAC?

    i checked that filter yesterday clean as a whistle,,its like an air line filter..
  20. Clark6

    when to change alky filter in PAC?

    Since 05 changed the whole pump with my brothers since his engine needed rebuilding in 09 (His was only 7months old or so at the time) my car was running good for 2 years with it then my car was down for like 6 mo. so 2012-13-ish was down for trans problems. got back going that brings us to...
Top