Search results

  1. T

    FS: Set of 6 used 36# Blue Top injectors ...

    Still cleaning out the garage and finding stuff I no longer need ... I have this set of 6 high-impedance Bosch (I think) Blue Top injectors that are rated at 36 lbs/hr flow rate. I had them in my car before I went stroker. They were working okay when I took them out, but have been sitting for a...
  2. T

    FS: NOS GM Grand National outside window sweeps ...

    I bought a set of genuine GM outside dew sweeps for my '87 GN back in 2009, and tucked them away so safely I couldn't find them until just now, after I looked and looked and gave up. I no longer need them now (of course), so they are up for sale. I paid just over $150 for them from a GM dealer...
  3. T

    FS: Frt & Rr GN upper door panels and GN front HL bezels

    Up for sale are a couple of sets of original GM parts off my '87 GN: I put new upper door panels in the front and rear, and thought I'd pass these originals along. They are for manual non-power windows, are in good condition with no rips, tears, or serious stains. There is some degree of...
  4. T

    FS: Black Danko front bumper fillers

    I redid the front and rear of my '87 GN with SpoolFool fillers, and thought I'd pass along these Danko's that I took off. They are painted black, and are in pretty good shape ... There are no cracks or major damage to them, and they are clean. The biggest flaws are the rub divots that the top...
  5. T

    Used Upper Dash Speaker Cover - Free - U Pay shipping!

    I thought someone could use this upper dash speaker cover ... It's in good condition other than it has a small crack near the driver side radio grill, and its got the usual warpage in the center and at the ends by the B pillars. Also, the windshield beveled edge has black windshield sealant...
  6. T

    F/S: Precision DBB 6766 CEA billet turbo

    I have swapped over to a different turbo, and no longer need this one. It is a Precision 6766 dual ball-bearing turbo that has about 2500 mi on it since I sent it to Reed Patridge at Work Turbo for a refresh. This turbo has the CEA billet wheel, a ball-bearing center section, a 3-bolt 0.63 A/R...
  7. T

    G-Body Parts & Brian Weaver - Much Thanks!!

    Can't say enough good things about Brian and his company, G-Body Parts. Brian has gone way out of his way to help me obtain a custom set of front and rear seat covers for my Lear Siegler seat install in my '87 Grand National. Brian even offered to help me sort out the pile of rusty power seat...
  8. T

    F/S: Type Ignition Module w/ adapter plate and MSD Coils

    I'm tired of swapping this coil pack off my car when I have to go to get it smogged here in California, so I'm unloading this nice set-up. It's a GM module with the adpater plate to bolt to 86-87 cars, and I was using three MSD coil packs. Parts are in good shape, one coil pack has a chip in the...
  9. T

    Need Pre-87 DS power seat track set-up

    I scored a set of 84 GN Lear Siegler seats that I am restoring, and the DS power seat track on this set is toast ... Does anyone have a nice set-up for sale? I need the single-motor with plastic transmission housing version. Complete with trim, switches, and harness would be desirable ... Let...
  10. T

    Front Coil Springs - Free to good home - U pay shipping!

    Free to good home are a set of front coil springs I was using in my GN to help with tire rub on suspension compression on the passenger side ... These are not stock GN springs, but I think they are Moog 7170's (I still have the receipt), which are stock for mid-70's Dodge vans and such. My...
  11. T

    F/S: Brand New Caspaer's IAT extension Harness

    I thought I was going to need this for a project, but it turns out I don't, so it's up for grabs ... Brand new, unused Casper's IAT extension harness, 36" long with the GM 2-prong plugs on each end. Casper's P/N 109019 ... $20 shipped to your door in the lower 48 United States via Priority Mail...
  12. T

    F/S: Used GM LT4 Gear Reduction starter

    I replaced my "old reliable" LT4 starter with a new one on my last engine build, so I have the old one for sale. I should have kept it as the new needed more work, LOL ... It looks tired, but it's clean, has no damage or bad gears, and works great. Sorry, I don't have the bolts for it, but they...
  13. T

    F/S: Nice used PS Pump, remote res, and braided AN set-up

    I bought this set-up from longtime member Karolko way back in 2011, and never got around to using it. Adrian told me the hose lengths are cut for a car with AC Delete, and I needed to keep my AC plus I wanted an aluminum pump, and made other changes so I have this set-up available. I did have...
  14. T

    F/S: PTE 65mm Plenum w/ RJC PP & AccuFab TB; GN1 test pipe; GN1 ext WG parts

    Just got redoing my stoker motor again, and have some parts left over that I didn't reuse ... See pics attached after description ... 1. I upgraded to 70mm intake, so I have my AccuFab 65mm TB, PTE 65mm plenum, and RJC power plate available ... The plenum has a light silver powder coat, the PP...
  15. T

    OEM AC Parts: Lines, condenser, compressor

    Guys, I overhauled my AC system recently, converting over to R134a from my R12 system. I have the AC lines, the AC condenser, and the AC compressor left over from the swap. The hoses are the later, non-blacked out versions (I had AC work done on the car in the mid-90s at the dealer). I had...
  16. T

    New GBody Stainless Cat hanger & Used trans mount brkt ...

    For Sale: I replaced my existing transmission mount and cat hanger set up with a new kit from G-Body and HRParts, so I no longer need these parts. I have a brand new unused GBody stainless cat hanger, minus the rubber isolator, and a GM trans mount/exhaust mount plate, with two GM trans mounting...
  17. T

    F/S: Used Hotchkis A/G-body rear control arm braces

    For Sale: Nice set of used Hotchkis A/G-body rear control arm braces for stiffening the upper and lower rear control arms on GM 4-link rear suspensions. They fit 78-up A-Body (Malibu etc) and 81-up G-body (Monte Carlo, Regal, Cutlass, Grand Prix etc). The braces are from Hotchkis, are black in...
  18. T

    F/S: Rust-free tank-to-frame lines ...

    Converted my car over to the RaceTronix double-pumper setup with their fuel line replacement kit ... I no longer need these factory gas tank-to-frame lines. They are nice rust-free pieces off my NorCal 87 GN. I know one of you North East or Mid West guys needs these, LOL ... Asking $50 shipped...
  19. T

    FS: Good used 87 PS pump, hoses, Reservoir ...

    I changed over my steering setup a while ago to a Delphi box, alum-bodied pump, and braided hoses, so I no longer need these parts. I would really, really like to sell them as a set. I have a nice 87 PS reservoir (the later one with the reverse threaded lid, and Y-shaped hose ports), the low- &...
  20. T

    F/S: Pair of Bare 8445 Heads in Nor. Calif ...

    I have a pair of bare casting # 8445 heads I no longer need. They appear to be in good shape, although they are a little dusty from sitting under my bench for many years. They are unported, unmolested, have no broken areas or cracks, and all the threads are good. Looking for someone in the Nor...
Top