Search results

  1. qws2000

    the temp gauge and XFI temp not accurate

    I have not driven the car for over a month, so I start the car and checking the fluids. The car is idling for about 5 min and I notice the temp gauge is over 150/ and the xfi edash screen is telling me its 170. I go to the radiator and notice the twin fans are on and the outside of the...
  2. qws2000

    A/C questions

    How do you know if you have R 12? I really want my A/C back... I
  3. qws2000

    Weldon 1100-A is it enough?

    Thanks everyone... Marleyskater420 I read your post, very insightful I am going with the 2025, and I the Kinsler seen to be worth the money....
  4. qws2000

    Weldon 1100-A is it enough?

    I want to use a Weldon pump for my E-85 upgrade.. I'm using 160 injectors, is a 1100-A enough pump or do I go with the D2015-a?...
  5. qws2000

    My billet TA block on Methanol/E85 w/ 160lb injectors and a Gen2 'street' car build.

    great set up 420... Is that a Magna fuel?
  6. qws2000

    Did I Make a Mistake Ordering Center Line Wheels?

    a few years ago Centerline 1 off a set of 17x10s 4.5.....
  7. qws2000

    Xfi and trying to understand the A/F?

    Cal, I must say I would be honored to have you help me thru the start up. Brian (bison) bought the xfi and whatever it needed... I spoke to Brian and he said it doesn't sound like anything more than a few tweaking going thru Maps (not sure if that's the name)... The car still made insane...
  8. qws2000

    Exhaust Manifold Gaskets? what gasket!!!!!!!!!

    Is it more common to have it give on the passenger side?.... I had it over boost a few psi and now I hear a exhaust leak on the passenger side... Do you always have to replace the gasket?
  9. qws2000

    Exhaust Manifold Gaskets? what gasket!!!!!!!!!

    Is it more common to have it give on the passenger side?.... I had it over boost a few psi and now I hear a exhaust leak on the passenger side... Do you always have to replace the gasket?
  10. qws2000

    Xfi and trying to understand the A/F?

    I upgraded to Xfi with the motor change, over the summer. The problem is with A/F... I have a eDash for the Xfi and it reads A/F of 9.7-10.8. The target reads 12.8-14.4 The car is setup to run on pump gas and Alcohol.. If the target is asking for a 12.8 and it is reading 10.3 what needs to...
  11. qws2000

    How do you know when its time for a new turbo??

    I feel like the more I do to this car, the less I know!!!!.. When you look thru these logs, are there anything that tells you that the turbo is pushing all in???
  12. qws2000

    17 x 9.5 wheel help

    yes mine tuck inside the wheel well... B/S is 4.5... I also have some more room to play with..
  13. qws2000

    My laptop is not working, can you adjust Air/fuel thru eDash??

    Paul, sorry I wrote that question poorly.. I noticed when the car was in 3rd gear the eDash was reading A/F 10.2 (on Dyno).... Thanks for info, No adjusting with eDash only can view data...
  14. qws2000

    My laptop is not working, can you adjust Air/fuel thru eDash??

    So my lap top is not working with the xfi, I have eDash, can you adjust the A/F... On the Dyno in 3rd gear it was commanding 10.2-10.8...
  15. qws2000

    275/60/15 Question?

    I put a 15 inch wheel on the rear, and the tire Im using are the New Nitto 501 Drag Radial 275/60/15... My question is what's a safe tire pressure on the street... I have 27.5 psi in them now, and problem is I jumped on it around 40-50 mph and car lost traction and Im thankful it was late at...
  16. qws2000

    17 x 9.5 wheel help

    17x9.5 295/45/17.... no cutting or fender roll
  17. qws2000

    E dash

    shit mine too...
  18. qws2000

    Interior is starting to match the outside

    ... Every winter I think I am done, and somehow I find myself knee deep in another project...
  19. qws2000

    Looking for a 17 inch tire?

    O k so I want to change out of the M/T drag radial 295/45/17... I want to put a soft auto cross type tire?? If anyone has some suggestions, please let me know
Top