Recent content by V6-Sauce

Now, The brake light kinda doesnt come on and kinda does

I use Prestone synthetic dot 3

The stock proportion valve pollutes the Accumulator

depressed the system 5 times, nice n' clean now when its depressurized coming from the acummulator. I ordered a new brass proportion valve, I didnt know they give problems( the original) & screw's up the acummulator ball inside. please help in my other thread I just posted on replacing the...

I need to replace the original brake proportion valve under the car(driverside) with a new brass version I bought/ for 87 buick regal(gn). Question removing & replacing, It looks like theres 2 bolts that mount it to the frame and one of those bolts is connected to a bracket that belongs to the...

It was good advice. I agree, My fluid hasn't been changed in a few years. The one Highwaystars sell's. I replaced maybe 14 years ago. And replaced the Pressure Switch a little after the accumulator ball was replaced. I'm lucky the motor never gave me problems, so far. I was thinking maybe flush...

I don't see any leaks

The light comes on hard pedal press, Not soft pedal press. With engine off, pressed the pedal 10 times to depressure the system, checked fluid Driverside was full. Full on the passernger side and alittle milky. Took half out, turned ignition on/engine off. Powermaster motor works/kept it at...

I just took it out of the garage after winter storage. No hard brake pedal feel. Still stops in the driveway, brakes work. But when I press the brake pedal fast light come on, when I let go light goes off.

thx dude, Appreciate the help. I'II check it out, If I cant find it. I'II come back an ask. Thank you

Where's the passenger side Grommet located to fish any wires into the cab? Doesnt look like u can from under the hood, if there is one there. I heard there is one there, I have no clue. All I know is the driverside grommet. Maybe somebody can shine a little light.

thank u, you're the best. that's what I wanted to hear. Looked like an awesome piece when first laid eyes on it, Compared to looking for a jeep shaft with GM US part#'s that don't match with GM Cdn parts#'s and nobody remembers the year and it's discontinued. Me too, I already have the bearing...

Last year I got a new orginal steering shaft installed, way to loose, And the mechanic I didnt like either, He kept telling me the upper control arm was in the way, not much room. Anyways this year picked up a Hooker Blackheart (71223022HKR) for the GM S10 & g-body hoping to stiff up the...

good info, thx gentlemen Nice steel fabrication, looks clean