TurboBob's latest activity
-
TTurboBob replied to the thread Aluminum Performance Transmission Mount Adaptors.Based on our measurements (Dylan and myself) it looks like this will work on the 4L80E swaps also (by reversing it front-back). This...
-
TTurboBob replied to the thread Aluminum Performance Transmission Mount Adaptors.DM sent
-
TTurboBob replied to the thread parts number for precision 120 lbs injectors hi and low impedance?.possible, how bad are the wires?
-
TTurboBob replied to the thread parts number for precision 120 lbs injectors hi and low impedance?.With the old Direct Scan, we used to see code 42 due to noise. We don't see that with the powerloggers, but its possible. so one...
-
TTurboBob replied to the thread parts number for precision 120 lbs injectors hi and low impedance?.the signals are 5v when the engine is running. A is pulses that time the ignition, B switches to 5v to change the ignition module...
-
TTurboBob replied to the thread parts number for precision 120 lbs injectors hi and low impedance?.yes
-
TTurboBob replied to the thread parts number for precision 120 lbs injectors hi and low impedance?.Code 42 is a connection code for the EST and Bypass wires. they are terminals A and B on the 87 ignition, I think they are the same on...
-
TTurboBob replied to the thread parts number for precision 120 lbs injectors hi and low impedance?.are you getting spark? The ccci connector that plugs into the ignition module is known for the pins getting weak with age, check to...
-
TTurboBob replied to the thread What s10 parts!????.this guy https://www.facebook.com/groups/384396908796098/permalink/672961489939637/
-
TTurboBob replied to the thread What s10 parts!????.there is a facebook group. I got spindles, bolts, brackets, dust shields https://www.facebook.com/groups/384396908796098/ Bob
-
TTurboBob replied to the thread PowerLogger 2.0 questions....That is an excellent tweak on the installation. Bob
-
TTurboBob replied to the thread PowerLogger 2.0 questions....Hi, Check the ECM harness header for water damage and corrosion. The car will run fine without the PowerLogger, its just a...
-
TTurboBob replied to the thread Cam sensor timing.The answer depends on how the tune in the ECM is set up. Most aftermarket ECU's can be configured for almost any alignment of the cam...
-
TTurboBob replied to the thread Scanmaster quit working.Other than checking the connections, there is a setting in the PowerLogger that changes the datastream mode. Thats what I would check...
-
TTurboBob replied to the thread Best Non Lock-up Torque Convertor Brands.PTC