TireFryer's latest activity
-
TireFryer replied to the thread Head Gasket Failure.I've tickled 30 before. I run the car around every day at about 27. Been perfect since 2020 when I put the car together.... I wouldn't... -
Probably not the fault of the gasket. Lots of people running 9441's don't have problems. The tune-up probably tells more about what...
-
I'm looking to install a hurst quarter stick in my car and need the following parts. -Hurst #1050059 -Hurst #5000025 I'm going to use a...
-
TireFryer replied to the thread Hurst Quarter Stick Shifter For 200/4r.Any chance you never sold this and want to lol...
-
TireFryer reacted to granitestategn's post in the thread 100,000 mile engine service - a few questions with
Like.
Already in the works. The main bearing I looked at while working on the rear main seal looked good. Cam and lifters looked good. No... -
TireFryer replied to the thread 100,000 mile engine service - a few questions.Yikes! That’s a lot of crap in the pickup… did you have oil pressure issues???? I would highly recommend you replace the timing set with...
-
TireFryer replied to the thread Head Gasket Failure.Not to hijack, but what’s a good alternative to the fel pro? I have them on my engine and I run 28-30 psi with alky and it’s held up...
-
Something to consider if you did not know already - the acceptable roughness average (RA) for a Fel-Pro gasket is different than a MLS...
-
TireFryer replied to the thread WTB: Vacuum Brake Pedal.Sorry - been busy at college. I do have an extra vac pedal. Shoot me a fair price and I can ship it out.
-
TireFryer replied to the thread WTB: Vacuum Brake Pedal.i may have one
-
Ya gonna have it back together & working by.......... See you there !!! 😎
-
TireFryer replied to the thread Shifter help!.Well it bolts right up so yeah. I’m getting a cable and bracket. I may make some riser blocks of it sits too low. Trying to do minimal...
-
-
TireFryer replied to the thread 100,000 mile engine service - a few questions.Mains are reusable. So are rod bolts IIRC
-
TireFryer replied to the thread 100,000 mile engine service - a few questions.Steve V rebuilds front covers. He could do the oil pump and mill the front to make it flat again. Just get a timing chain and gears and...
-
TireFryer replied to the thread GREMLIN CONTINUES TO BE PRESENT MAKING DRIVING UNSAFE.When mine would die it turned out to be a worn can sensor along with a cheap sensor cap. I’d check that and the crank sensor.
