Recent content by Sweet6

  1. Sweet6

    GT3255E - Anyone still run it?

    I ran a 3255E in the mid-late 00s. I got 11.30s at 123mph on 27lbs on s factory longblock. I had a LU converter so that helped the MPH. But on the street I loved that turbo with a 0 pump vigilante there was pretty much zero lag. I ended up swapping to a 6262 Journal bearing and it spooled like...
  2. Sweet6

    Precision Vigilante 10.5"

    If you are running a relatively stock set up(even running into the 10's) then I would just get the work done that you listed above.
  3. Sweet6

    E-85 stabilizer? should be used ?

    Probably the Lucas. There was a stabilizer test on here recently. Looked like it doesnt do much. But wont hurt either.
  4. Sweet6

    Fair Price for Heads

    I agree with others saying that you dont need heads for mid 11s. But they make a night and day difference. if you have the $$$ do them. Heads were my favorite mod next to alky/E85.
  5. Sweet6

    Which in-tank fuel pump??

    The DW300 will work well, cheap, and easy install. Will go at least mid 10s with alky and the 60lb injectors.
  6. Sweet6

    Fuel pressure problem

    I thought back in the day guys would bypass the check valve to get more out of the pump. Back when the 255 liter pump was the only intank stock hangar pump.
  7. Sweet6

    Fuel pressure problem

    Thanks for the reply. I thought as you said that once the car is running it doesn't matter.
  8. Sweet6

    Fuel pressure problem

    Dumb question, is it a big deal if there is not a check valve in that DW pump? Does it adversely effect anything when it is running?
  9. Sweet6

    Cruz Vacuum relocation spacer for Champion race intake

    Compete kit new never used. New is $285 on Cruz site. $240 shipped.
  10. Sweet6

    How does the Turbonetics exhaust housing fit into the equation?

    I don't have a direct comparison but I switched from a PTE .85 to a PTE .63 with a 6265 DBB and it was a pretty significant difference in spool up in around town driving and the dragstrip. At the track I could get the same 60ft times launching at 2lbs of boost with the .63 as with 6lbs with the...
  11. Sweet6

    How does the Turbonetics exhaust housing fit into the equation?

    They are fine they are just different than the PTE. Most people think the Turbnetics is a tad smaller. At least with the .63. If that is the case it will spool a little faster and then it wont support the same max power. it is one of those preferences of what you want. But it is pretty much...
  12. Sweet6

    Manual boost control valve

    sold
Top