255-60/15 Mickeys running 93 octane and straight Methanol injection @ 24lbs of boost on a TE60. I roll on the throttle from a dig to keep from spinning. If I mat it from a dig on the street, I'm up in smoke.
Out of curiosity, why would I want to start logging fuel pressure. Testing it with a gauge, I am building boost 1:1. I mean, I know it would be beneficial to always have it on the fly but is there a specific reason?
I am going to move forward with the wire testing, just glad I got over this...
Issue has been resolved. Had a second set of eyes look at it yesterday. He found that the grounds from the harness to the back of the driver head was non existent. We found the ground wires and traced them up the passenger fender where they were rigged up, bolted together and connected to a body...
Tps at idle is 4.0-4.2.
I appreciate the feedback as well, but I really haven't thrown any parts at it to fix.
Fuel pump was done two fold. I had no clue what was in there other than what I was told and my fuel rail gauge was reading everywhere. If I was going to drop the tank and go through...
Not giving up that's for sure. Taking a step back.
Ruled out fuel pump and fuel filter as they are both new, and my issues still persist.
Feel like the tail is wagging the dog in my case.
Fuel pressure isn't the issue as I have plenty up top, and I am building through boost.
Think I am...
Yes.. Ran her yesterday with a good quality fuel pressure test gauge. Proved my rail mounted gauge wrong. I'm rising from 43psi to 70psi at 20lbs of boost.
New issue(s) now.
Car bogs hard at the top of 3rd almost as if airflow is being restricted. Had this happen on my Turbo Neon, but that...
Pretty sure you're correct on the ECM Earl. I fought hard with this senerio. Voltage displayed on my volt gauge was 13.5v+ but my Powerlogger only saw 12.x volts from the ECM. Chased power and grounds everywhere and after reading a few of your posts as well as a few chats with S. Wood I narrowed...
Thx man.
Just replace the pump a few days ago per my first post. Used a new fuel line for the pump assembly. No fuel leaks either.
I thought the pump was the issue as it only happens when the car is warm. Assumed the pump was heating up and dropping fuel pressure when hot and suspect to...
HI again Nick.. So I bumped up the base FP to 50lbs, cap off and it jumped up to about 56lbs cap on which i know is normal. Same exact thing. Cannot get the O2's above 800mv.
I pull off to the side of the road, check my FP on the rail gauge and its sitting at 42lbs capped.
I know I am spraying...