Recent content by sick GN

  1. S

    2002 supercharged 6 speed Z28

    Sure send pictures and details to bennymo2001@gmail.com
  2. S

    2002 supercharged 6 speed Z28

    Car is still up for trade, can't put cash on top tho... maybe 1000 or so if it's a real nice car, just don't have a lot of money at this time... too many bills lol
  3. S

    2002 supercharged 6 speed Z28

    Where are you from? Wouldn't mind a trip lol
  4. S

    2002 supercharged 6 speed Z28

    Some pictures
  5. S

    2002 supercharged 6 speed Z28

    T-top car, ebony leather interior in great shape... forgot to post that, car is silver
  6. S

    2002 supercharged 6 speed Z28

    I have a 2002 supercharged Z28, it is a 6 speed car, and has a strange built Dana 60 rear with 4.10 gears... full exhaust, 228 cam, and a vortech V1 supercharger, also intercooled with a blow off valve... -8an fuel rails, a1000 afpr, 340lph fuel pump, and 80lb injectors.... running 10lbs of...
  7. S

    New combo noisy startup???

    Is this always like this? I've put cams in other cars without doing this... Is it just the fact that I used the aluminum heads? I mean if I used stock heads and everything and just switched the cam I can't imagine I would have to measure pushrod lengths...
  8. S

    New combo noisy startup???

    I didn't check anything... I was under the assumption that everything was basically the same... I used the stock rocker arms and the cam I put it I didn't think would have changed the pushrod... now if the aluminum gn1 head does change it then that's my problem... Anyone have a setup of a gn1...
  9. S

    New combo noisy startup???

    Blew a head gasket so I figured it was time to put these aluminum gn1 heads on... I also upgraded the cam to a 204/214 flat tappet... got it all together and fired it up and it's super noisy... had 60 pounds of oil pressure... my question is... do I need a different length of pushrod with using...
  10. S

    aluminum heads? what is needed?

    Blew a head gasket last night... have a set of gn1 aluminum heads in the garage so I figure now is the time to put them on... what is needed for the install? I heard you need to use washers for the head bolts but I really don't know... which head gasket? It's a stock long block, never rebuilt...
  11. S

    blowing and sucking out of passenger breather???

    Didn't run hot at all... can I blow a head gasket and it be just the oil portion of the gasket?
  12. S

    blowing and sucking out of passenger breather???

    Just screwing around on the street... raced a new camaro ss... blew his doors off but also messed up my car... it's missing now and smoking real bad... the smoke is oil... popped the hood and the passenger breather blew off... put my hand over the hole and it's sucking and blowing out of it...
  13. S

    Exhaust F/S

    Ok sounds good just let me know when you find out
  14. S

    Exhaust F/S

    Does it look like it fits fine? I don't want to spend the money on something that has problems... but yes I am seriously interested
Top