Recent content by shmed

im looking for the metal clip that holds the astroroof open close switch to the headliner

has anyone tried ot redye their headliner? i just noticed mine has lost its colour in different spots it was replaced years ago and really dont want to replace if i dont have to

thanks for all the great ideas fellas much appreciated if it wasnt our thanksgiving weekend id be in the garage see if i can disappear for awhile ha ha

solenoind? if your meaning the one on valve cover ive bypassed it running tuner style hose from turbo to wastegate not sure about programming tt chip? ill try your suggestiong an get back to you am i looking to see what rpm the boost start at?

ok reouted boost vac line no more checks in ithe way tested boost gauge read fine under boost an vac applied 5 10 20 an held it for a few minutes wastegate started to move around 5 psi an slowly opened as i increased the air pressure

ok the wastegate holds 25" of vaccuum an opens when air is applied its a hd unit the gauge is an autometer 30 30 tied into the vac line under the egr valve it feels like its still pulling but definately not like it should wont even spin the tires yes all fasteners are tight the only...

ok not sure where to start. so cold start 18". vac fuel press 42 line off. ttt 57 chip. 60lb inj 3"dp rjc 206 roller cam champ iron heads injs hot wired scanmaster at cold idle 600-800m lv blm 128 130. iac 50s. temp 165. etc. 17 blade 9.5 lock up 3400 convertor bought used but...

so has anyone tried this? results ? does it work with a 4" man pipe? txs

ok so im thinking its time to upgrade but there's so many in tank pumps what's the best bang for the buck? currently running reds dual in tank pump both hot wired. 60 injs small cam champ heads etc im leaning towards Racetronix fuel lines new press regulator just not sure single 340 400 or...

I thought the same thing. I can spin each one by hand not sure if this means anything but in reverse it drives what I consider normal idk

well it was tough to pull. the fuse out of the holder so im leaning towards shitty fuse? is there a brand that I should be looking for instead of these multi packs for china? on another note does it help to apply dielectric grease before installing ? a sparky at work. reccomends me...

ok here's what I found. on the convertor. 44 212 49954 5624. hope that helps

ok txs chuck

yep did that. was told its for a gn no other info given