Recent content by S10xGN

  1. S

    Gotta love a scammer...

    Put my truck on a local board and this is what I got. Guy said he's from OH, but the number comes back to LA. Needless to say, that was the last contact...
  2. S

    Turbo Buick powered '96 S10

    Dan can't commit at this time, still up! Gonna go on E-Bay soon. G-Tech graph: first run is with the 12" restalled "orange stripe", second is with the 9.5" PI Vigilante (representative of it's last good tuned state). Since the Alky leaks, I've got it and the BSTC turned off. So, maybe 14# max as...
  3. S

    Turbo Buick powered '96 S10

    My next one will be Win10 (NOT by choice). I'll try and run my current Win7 config from a portable HDD inside a VM. Too much new ch!t to learn!
  4. S

    Turbo Buick powered '96 S10

    Good news! My son came by today and helped me pull the injectors. Cleaned them all and it fired right up. So far, the only mechanical issues are the SS braided feed line from the alky reservoir has a leaking crimp at the pump end, about 2 1/2 feet of #6 line. I'll wash it tomorrow and charge the...
  5. S

    Another disaster....

    A logical (not hysterical) explanation of what really happened: https://www.dailywire.com/news/27491/every-single-government-authority-failed-parkland-ben-shapiro So, tell me why (again) should law-abiding gun owners and the NRA be made the scapegoats of yet another total failure of the...
  6. S

    Turbo Buick powered '96 S10

    SETX, 90 miles east of Houston, 8 miles south of Beaumont...
  7. S

    200R4 behind an LS

    I've had a "Jake built" 200R4 / LS1 in my '72 Maverick since 2009. Flat flexplate and a $45 spacer and it bolts right up (minus that one bolt).
  8. S

    Turbo Buick powered '96 S10

    Yes, I'm surprised it wasn't in my sig, I haven't looked at it in awhile. Stock BRF 200R4 with a WE4 (Bruce) shift kit. and 9.5" PI Vig converter Also, the rear tires are now Nitto P275DR's on 8" Welds, but the 10" wheels will go with the truck. The bias-ply Hoosiers were a little "wobbly" at...
  9. S

    Turbo Buick powered '96 S10

    Took some fresh pix today. Showing two boogers, a cheek print where I butt-slammed the front of the hood when the cable release got hung-up, and small mark on the LF fender where I used a prybar to attempt a fender alignment. Other than that, it's just dirty. Last time I tried starting it, I...
  10. S

    Turbo Buick powered '96 S10

    Sorry guys! I'm not getting notifications, all msgs responded to. Will try and get better info up tomorrow.
  11. S

    Another disaster....

    Absolutely could have! Profiling, whether by cops, school personnel, or parents, has been proven to work. But, the Libtards are gonna hate on guns as usual, instead of fixing the real problem, that being loveless, desperate people with no hopes of making it in the real world. These people are...
  12. S

    Turbo Buick powered '96 S10

    I'm getting too old and creaky to do any hotrodding anymore, this truck was built in 2002 and driven regularly until 2 years ago when my back decided to pitch a fit. Stored in a covered carport. It's dirty and has been sitting for 2 years, will need gas dumped and refilled at the minimum to run...
  13. S

    Job Stress?

    Yup! My youngest brother (59) is going thru it now at GE's Cincinnati Jet Engine Plant. He went straight there from 8 years in the AF, built the engines, then wrote the build/rebuild manuals, also designed and built numerous fixtures to facilitate the process. Now getting d!cked over after...
  14. S

    Job Stress?

    I liked my job, but left three years early cause of the way management starting d!cking us over. When you successfully run a refinery unit for 30+ years and suddenly a bunch of 20-something "engineers" two miles away in a 4 story office cubicle start telling you how to operate, it's time to...
  15. S

    RainaisCrazy. I don't know about that but she sure can eat! And she is small. lol

    I'm a big guy and it would take me half a week to eat that...
Top