Recent content by Renthorin

$25.00 + shipping ???

Selling my O2 monitor. It is a digital 02 meter that hooks directly to the 02 sensor circuit so the values are "updated 2.5 times per second. Large LED display is bright and easy to read. Check your 02 volts at a glance." Is this one, but without the knock detector. I have that as a separate...

No. It started right up though. :-)

Yeah I wondered if maybe the wires were not seated as well as they could be. I'm going to clean the connections with my computer board cleaner/protector spray and then go for a longer ride.

Ok...update time. I finally got around to taking the poor girl out. My concerns earlier about sensors not reading is because I was idling in the drive way in 'open' loop. Forgot that the o2 doesn't read well in that mode...go figure. So I took it to the car wash a few miles away and rinsed...

OK....after not doing a damn thing to the poor car last year I'm ready to try to fix this problem. I have a 3.5" MAF. Checked the translator settings and they were set for a 3" MAF but have been since day one so not sure that is the problem. I measured 3.5 as the outer diameter of the MAF...

Thanks. No, it wasn't sarcasm. I honestly don't know where it is :-) Well...I didn't know. Now I do. I'll check the turbo Y hose too. Just have to wait for the weekend Thanks again gents for all the help. Will

Where is the cam sensor? :)

It's the LS1 one. Not sure how to tell and I don't recall. I've had it for many years now.

Pretty sure the vac leack is coming from the throttle body. When I put a power plate in I cranked too hard on a bolt and it stripped the threads. That was about 8 years ago and it's had the vac leak problem since then. I need to fix that but I have a feeling that isn't this problem. I let...

Not sure who is in my area these days. Our local club disbanded a few years ago. Not sure this matters but the fuel I've run for the last few years and what's in there now is 110. I just love the smell too much to go back to 94 : - ) Question - if I'm just sitting in the driveway and get on...

Parked the car 7 weeks ago with a fresh tank of gas. It ran great. Today I take her out for a car cruise and as soon as I start to build boost she begins to stumble. If I push it I get a backfire under the hood and loss of power. I let up and can cruise all day until I build boost. Stock...

Drained the old fluid, cleaned things up, put on new cover (replacing TA Performance cover), and added 2 quarts of oil plus anti-chatter. No leaks and the grinding on sharp left turns is now gone :)

Ok cool. I'll just snug them down lightly.

Anyone know the TQ for the rear diff bolts? I was told 30ftlbs by a GM guy but want to clarify from a TR owner.