Pronto's latest activity

  • Pronto
    Pronto replied to the thread Rebuilding my NEW engine.
    Looks like another buying a used engine horror story. Probably needs everything and in the end it will cost way more than you bargained...
  • Pronto
    Pronto replied to the thread Head Gasket Failure.
    Sorry that was for Paulmac201. If he had ARP studs he might not have had full clamping. The nut can bottom out on the stud without fully...
  • Pronto
    Pronto replied to the thread Head Gasket Failure.
    What did he use, stock bolts, ARP head bolts or ARP head studs?
  • Pronto
    Pronto replied to the thread The First Comp Turbo CTRX Hubless.
    That's wild!
  • Pronto
    Pronto reacted to Mr.Spool's post in the thread The First Comp Turbo CTRX Hubless with Like Like.
    Ok 1st test ride on the dynomans 3 bolt triple bb 6971 ctrx/hubless turbo. The holley log showed the turbo made 1 lb of boost at 2,052...
  • Pronto
    Pronto reacted to dynoman's post in the thread The First Comp Turbo CTRX Hubless with Like Like.
    Starting on the new tune Saturday , so may be we'll have some info to share by Saturday evening .
  • Pronto
    Pronto reacted to turbo6mike's post in the thread First 9 second pass with Like Like.
    I have been wanting to post this for a while now just have not had the time. I ran 9 seconds with my car last fall and wanted to share...
  • Pronto
    Pronto replied to the thread runs with stock ecm, not with xfi 2.0.
    Ya, try Norbs.
  • Pronto
    Pronto replied to the thread Belly pan/drip pan.
    Thanks Gregg. I'm following your engine freshen. Hope you get back together and having fun with your GN again!
  • Pronto
    Pronto replied to the thread And he thought.....
    But he kept looking for the real killers even after he got out of prison.:ROFLMAO:
  • Pronto
    Pronto replied to the thread front brake upgrade.
    I have these Wilwood oversized piston calipers and Raybestos Element3 pads and rotors. Wilwood Disc Brakes
  • Pronto
    Pronto replied to the thread PCV Help?.
    Ah, I didn't think about that spot. Are you still running the pcv too?
  • Pronto
    Pronto replied to the thread PCV Help?.
    Chuck, I looked closely at MM and they had a nice solution but the packaging was too big for my engine compartment. I just couldn't find...
  • Pronto
    Pronto replied to the thread PCV Help?.
    Are you using a closed system? If so you can take the line going to the intake pipe and route it to the other valve cover and skip the...
  • Pronto
    Pronto reacted to dynoman's post in the thread The First Comp Turbo CTRX Hubless with Like Like.
    I just got my compressor housing back from polishing and got it mounted on the car. Now off to change boost control from the Turbo...
Show older items
Top