Recent content by Metacom

The blower motor was my initial thought. I put in the old one I pulled off (possibly original) and the air direction did not change. As far as the vacuum lines, I investigated that as I thought that was the reason for the door behind the dash not opening. I followed the diagram on the car and...

Have an interesting situation with my A/C and after doing some research I’m stuck…little background: Last summer I recharged the car for the first time in awhile, system blew cold although not strong through the vents for a couple of weeks and then blew warm. Determined that the condenser had...

Can anyone share the o-ring size for the A/C system? Looking particularly for the sizes for the condenser and evaporator. Bought a o-ring set but seem quite a bit thinner than what was pulled off.

Yes

Looking to buy a working A/C evaporator mine has a leak.

I ordered a fuel pressure gage that looks like goes straight on the schrader valve. So is measuring fuel pressure not possible with the vehicle in park and on it has to be driven?

Sure thing Chuck, I’ll try and get some readings tomorrow. Just put the gage on the schrader valve located on the fuel rail? Does the car need to be running or just the key turned on?

Hi All, I recently changed the fuel pump on my 87 GN with a Delphi FE0115 pump. Since changing the pump, I’ve had an intermediate issue with a popping noise at 1/4 throttle or so and the car failing to accelerate. It has also stalled a couple times when putting it in reverse. Had a spare...

Hello, yes it’s low mileage and an all stock car

Looking for a factory MAF for an '86-'87 GN (was told that make a difference?). Please PM me or respond to the thread with a price..Thanks

What’s needed in order to convert? How straight forward is the conversion? Cleaning seems to help for a few starts then back to hard cranking.

Been chasing a case of hard starting issue when car is cold. Have ensured the fuel pump / fuel pump relay is not the issue. Earlier today when changing the air filter I also pulled the MAF and cleaned it. After getting everything back together I started the car and it started right away when...

Update: I remembered I plugged in the MAP sensor while changing plugs and kept it plugged in (has always been unplugged). Unplugged it and the fuse hasn’t blown…weird. Guess I’ll tackle that issue once I iron in the rough idling and slight backfiring after changing the coil pack and module...

Thanks for the info!

The bottom one labeled gages next to the battery plug.