Recent content by HotAir6 v.2.0

Lol. Haven't seen that in a long time. That shroud is in a box on a shelf.

That is perfect. Thank you. Where did you find that. I didn't see it on my factory service manuals.

Why do the links go bad in these threads. Where is a good diagram of the throttle body vacuum block. Can work on replacing all the links on the first post in this thread? i couldn't get any of them to work. Thanks in advance.

thanks. that pdf helped. what i read elsewhere is that one of the solenoid wastegate ports is just a vent to atmosphere. the diagram shows it connected to the PVC port. my PVC goes from the PVC to a tee, and the tee goes to a port on the bottom of the throttle body and to the passenger rear...

It's been a while since this post but can you please share your better drawing? My factory service manual is pretty unclear on what goes where from the solenoid wastegate valve to the correct ports.

Looks Great. Better than great really. I didn't see in your post where you got your door panels and if you bought the uppers and lowers or painted/cleaned them. I know gbodyparts has matching rattle cans (not sure if that's what you used) but I've only used if for my a-pillar and haven't had...

What do you want for the intake?

The list is long regarding what's been done to the car. But to get below 13 I increased boost and added fuel until I needed something else to add more boost and fuel. So I ended up with alky, 60lb injectors, ta33 turbo, and all the stuff to monitor parameters while I hit the boost. I think...

Old thread. I've been away from the forum a while. Not sure why. I drive my 84 weekly. It's got 140k on it. Not stock but still hot air. I hit the drag strip maybe 5 times a year. This August I won our local turbo event called turbo thunder. We we're bracket racing so I wasn't the fastest but...

Planning to be back on after a hiatus

Do you still have this?

I've got a buddy looking for a set of Hot Air headers. Does anyone have a lead on a good set? Thanks

I put an Alradco setup in my car this summer. Fits great, works great. I also bought the dual fans from Alradco. Caspers has a hot air conversion adapter that was helpful for making the proper connections. I did use stainless steel braided hose from Fragola instead of the OEM tubing for the...

Nicely done.

You should just call caspers and tell them what you've got. They have always made the time to talk me through any issues I've ever had. You may find they have more things you might need. Fuel pump hot wire kit, headlight relays, stuff like that.