Recent content by Hiwinds

  1. H

    My tta vs nissan 370z

    The old girl showing him the way to the finish line.
  2. H

    TTA at the track (360 videos)

    Went to the track with my new Toyo tq drag radials and gear 360 camera. {II have since ordered a mic to get better sound} First pass I ran a v8 swapped s10. Went 8.4@82 on a 1.75 60' The second vid is the best pass of the day It was against a 350z. Went 7.98@82 on a 1,74 60' The car should...
  3. H

    first 7 second 1/8

    Ported heads, 212 roller, Trw pistons, 80# injectors.
  4. H

    first 7 second 1/8

    Finally got into the 7's. I was on 17 psi and toyo tq drag radials.
  5. H

    TTA VSS Sensor?

    I got a speed sensor from "jags that run" and it has been working fine for over a year now
  6. H

    Took her out today

    Thought you were selling it. Glad your not though.
  7. H

    went really lean

    Sucks having to catch a ride to work......
  8. H

    went really lean

    Been running it a while. Got up this morning to go to work and a no start happened. No fuel pressure. Checked power and ground at tank and they are good. So I guess pump was bad. Is was the second tt340 I've had go bad inside a year. So gonna step to a 450 so it will fully support the 80s.
  9. H

    went really lean

    Car is on e85. The tta started a bad stumble from 2500 to 3100 just out of the blue. Every time it stumbles is goes lean. It is like you turn the key off. Have a log I will post when I get home. Key on i have 50psi fuel pressure and running I have 42 psi fuel pressure. Checked the grounds and...
  10. H

    another pump question

    Looking over the logs I have the voltage at the ecm is low. But it has 14.2-14.4 at the back of the alt and at the bat.
  11. H

    another pump question

    I have the sd2 chip. Grounds have been upgraded. I will try to get a log up this afternoon.
  12. H

    another pump question

    Ok I have a hot wire kit going to a turbo tweek 340. I have -8 line to a fram high flo filter housing with a wix filter then -8 to the rail then -6 back to the tank. 80# injectors. Motor is a stock bore 3.8 trws, ported heads and intake, 212 roller and a little bitty ta49. With fuel pressure set...
  13. H

    Got called out....

    I have 76dbb that I'm itching to put on. If it get the fuel system and intercooler worked out. Oh boy he better watch it. Right now it's got a old old old ta49 in it. Was on it when I got the car from Bo.
  14. H

    Got called out....

    Still got a ways to go. Only 17-18 psi. Looking for 23-24. But I think I will have to upgrade pump and injectors I'm at 85-90 percent duty now
Top