Recent content by GNandTTA

  1. GNandTTA

    $100 Package Deal & $100 Tool Deal

    PM sent
  2. GNandTTA

    New Performance Parts & NOS T Center Caps

    pm sent on the injectors chip combo
  3. GNandTTA

    TTA aftermaket intercooler - who is still making them?

    Looking to see who is still making them. Tried calling Jim Dunn but never got a call back.
  4. GNandTTA

    60 LB Injectors

    pm sent
  5. GNandTTA

    TR6 ignition and Coils $400

    pm sent
  6. GNandTTA

    Intermittent code 41

    Was cruising at about 30 mph and all of a sudden I could feel the engine bog down, the PLX A/F gauge went from around 14 to pinned at 18+ and then bounced back to around 14 in less than a second. This happened about 3 or 4 times then the Check Engine Light came on. Did it a few more times while...
  7. GNandTTA

    TT Chip and 60 lbs for sale

    pm sent
  8. GNandTTA

    Door handle insulation

    One of the doors on my 87 GN is missing this little circular piece of insulation that goes on the inside door handle. Anybody have one?
  9. GNandTTA

    Accurately measure pressure output from alky pump

    Wanted to make a pump pressure tester which is available all the time with just a hit of a button. I do not see how you could get an accurate measurement of pump output with the nozzle hooked up? So I was planning on putting a tee in the line and connect an alcohol safe transducer and then...
  10. GNandTTA

    Connect Power Logger to Autometer 2246 sending unit?

    I have Autometer #5763 100 psi fuel pressure gauges in both cars. They have the Autometer #2246 sending unit. Can I just tap into the sending unit wire going to the gauge and use it for the Power Logger? Any problems doing this?
  11. GNandTTA

    Factory radio mounting brackets

    Need a set after some a-hole raped my 87 GN. The alarm saved the car but they still had time to grab the radio.
  12. GNandTTA

    Jacksonville HVAC

    Going to install my own HVAC systems in newly purchased home in JAX and having trouble finding an HVAC guy to just do the final inspection and test. All places I have called want to supply the equipment and do the full install. Just thought I would ask if anyone can help or know of someone that...
  13. GNandTTA

    Anyone good with car alarms?

    Not always. Any good alarm will still lock out the starter. Code Alarm and most others I've installed do. What you can do is locate the alarm box and jump the starter kill wires - bypassing the starter kill. Probably have to pull the fuse(s) on the alarm so it does not go off after the pre-set time.
  14. GNandTTA

    Any good hyd roller lifters other than clicky Comps?

    damn, now sub'd
Top