Recent content by eastwoodad

  1. E

    N/A Build...PICS INSIDE!

    I can't believe it has been almost 5 years since I posted here!! The car isn't dead...actually got it painted last year and contemplating putting a 2004R in it and dropping the rear gear to cruise it more. My favorite local track closed down.
  2. E

    N/A Build...PICS INSIDE!

    I may be slow to do anything productive on it, but the car is never going to be sold or permanently parked....couldn't get anything for it anyway, and has too many "loaned" parts/labor on it from my dad, haha.
  3. E

    N/A Build...PICS INSIDE!

    My dad took the car to the track last night...couldn't make it with family duties. The report was finally a 14.93 at 90mph...still running a humble 2 barrel. 60' improved, but could probably benefit from some smaller throttle bores to help torque. All in all, I am pleased and will keep...
  4. E

    N/A Build...PICS INSIDE!

    Thread resurrection...I have been working slowly on seemingly insignificant things. Put a new headliner in and finally welded up a seat frame for a poly bucket seat. I want everything to look stock on the surface of the interior, but with some weight saving tricks underneath. My dad had a...
  5. E

    N/A Build...PICS INSIDE!

    The only things I would change for a daily driver would be a touch smaller cam and an overdrive trans. I say go for it...it is easy to spend other people's money, right?
  6. E

    N/A Build...PICS INSIDE!

    Thanks 85tr...it is a pretty no-nonsense combo built pretty cheap. These parts are a dime a dozen for the most part. It looks like you have improved your combo a bit since running that 15 second quartermile! That is my problem now...to do much more it starts to get exponentially more...
  7. E

    N/A Build...PICS INSIDE!

    15.12 was the best I could muster on Friday. I just sourced some aluminum rear drums, and am going to do the first "real" weight reduction on the car by pulling the bench seat and installing a single poly bucket seat. I am so close to a 14 second pass N/A, but don't have the money at the...
  8. E

    N/A Build...PICS INSIDE!

    There we go....15.12 w/ a 2.08 60ft. Going to give it one more go.
  9. E

    N/A Build...PICS INSIDE!

    Out of the blue, the stars aligned and I was able to make it to the track tonight...car has been sitting untouched through the winter. Didn't even blow the cobwebs off...ha-ha. Two passes in and have run a 15.25 spinning with an awful 2.28 60ft. Waiting for a track cleanup and going to try...
  10. E

    N/A Build...PICS INSIDE!

    I have always been fascinated by NA V6's in NHRA stock. I would love to know more about those two cars you posted. I would guess since they are 4.1's they at least run a 4 barrel Q-jet. Probably a well engineered cheater cam, loose tolerances, compression, custom headers, a lot of gear and...
  11. E

    My blow thru build

    Looks great, this is kind of where I think I am headed with my build at some point. I bit the bullet and built the block the best I could afford at the time, and am glad I did. Keep us in the loop on the build progress. Would love to hear some 1/4 mile times too!
  12. E

    N/A Build...PICS INSIDE!

    A few more timing tweaks, down to 15.10 at 89mph in 80 degree weather. Life is crazy with my 4 kiddos 7yrs and under so my dad has been having fun tweaking it in my absence. I would like to get it in the 14's N/A and still nearly full weight. We might accomplish this simply with cooler weather.
  13. E

    N/A Build...PICS INSIDE!

    EK02, that is great advice. I had decided on the Super Power Shot kit, or the Sniper (not sure of the differences). I only would probably do 100, to 150max. I do have a high output mechanical pump on it, but was curious if there should be a supplemental electric pump to run the fuel...
  14. E

    N/A Build...PICS INSIDE!

    Thats the plan...100 to 150. I want to work out all the NA bugs first...only taken about 7 or 8 years...haha. Thankfully my dad has had an itch to work on it lately.
  15. E

    N/A Build...PICS INSIDE!

    Updating the thread for posterity...after the change to a 500 2bbl, weight reduction in the bumpers, and proper distributor. Went consistent 15.20's at 87mph, with 2.05 60ft.
Top