Recent content by Drewster

  1. Drewster

    Replacement Fuel Sock / Strainer - Walbro

    So it turns out my Walbro pump is a GSS 294 and has a 22mm ID for the fuel pump sock. 22mm ID is also for the GSS 340 pump. Racetronix appears to have them in stock. Racetronix pn FFS-122A Sock Unfortunately Autozone and Oreiily both let me down. They had 22mm strainers listed for...
  2. Drewster

    Replacement Fuel Sock / Strainer - Walbro

    I'm looking for the part number and vendor for Walbro 255 fuel pump strainer. I've seen AIrtex FS-111 and FS-30 for 340L pumps. Those number seems to be outdated not evensure if OK for 255L pumps. Any help is appreciated. I'm going to inspect my pump strainer soon and id like to be...
  3. Drewster

    Bates 2020 car show event pushed back two months to Aug 2nd due to corona virus.

    will keep my eyes open. hope ya find something worth while ; )
  4. Drewster

    Bates 2020 car show event pushed back two months to Aug 2nd due to corona virus.

    Neil Were you going to look at a GN or T-type? (what color?) Im in Simi so ill keep an eye out for 'em. Glad your looking for a turbo car. the Ultras are nice cruzin' SC couches but dont count as a Turbo Buick. :)
  5. Drewster

    Crank Key

    McMasters Key 98592A227 carbon steel and 98525A227 is alloy steel. These are for production cranks. length is OK maybe the prior post can be removed
  6. Drewster

    Crank Key

    Sorry the McMasters Key 98592A227 is to short. Production block crank key shows up as PN 1352537 3/16 x 2-1/8
  7. Drewster

    Crank Key

    For future stock crank woodruff key reference, I've use McMasters 98481A227 McMaster-Carr
  8. Drewster

    WTB Power Steering Reservoir

    Thanks for the replies. Nat, I’ll send message. Boost231 nicely done! Trying to keep the stock look though. Sent from my iPhone using Tapatalk
  9. Drewster

    WTB Horn (low note)

    Wanting to buy a GN/T horn. the one closest to front burned out on me. Any available?
  10. Drewster

    WTB Power Steering Reservoir

    Looking for a PS reservoir with the side by side ports (almost looks like a Y) I already have the one with the ports stacked in top/bottom configuration. Any around?
  11. Drewster

    Performance recommendations in CA

    Visual inspection OK and cat converter in place should be an easy smog pass for your near stock car.. Smog first then change stuff. In any case the chip needs to match the injectors. Before any paper work You can ask the inspector to look under the hood and ask if it looks like it will...
  12. Drewster

    Max boost launch on MT DR 275/60/15 ?

    I tried with no air bag pressure but had some rubbing on a hard hit, so running 5psi at the moment
Top