Recent content by Aso544

How do those number look? From what I’ve read they seem correct ASO544

My alky pump is brand new....replaced my old one due to a small leak. I tested it using the button while at idle which makes the car stutter and start to shut off. Not sure on my fuel pump’s age but I’m guessing it’s pretty old but I did get a FP tester and her is what I discovered. Ignition on...

I was hoping to test a few things to see if something simple was wrong as the closest BGN guy is about 5 hours away

my Car went from running perfect to leaning out on top end causing knock. My alky Kit is function fine and set on 6 and I tested it to make sure it was operating. I even dialed my boost way back but still getting too end knock. I made no other changes to any settings. I’m thinking maybe my fuel...

Trying to find on my setup how to attach a fuel pressure gauge to test my fuel pressure. I suspect the current permanent one may be false. Can find a valve to attach one to.

Getting some new knock at top end of WOT runs. Just appeared. Feel I’m leaning out up top and suspecting a possible fuel feeding problem. I adjusted boost down to 15 from 19 and it still present. Looking for some advice. My fuel pressure according my fuel rail gauge is 25 at idle and 30 with...

Thanks guys... we did ok and were very lucky the track kept us from getting the really high winds and rain. We. just have no power currently and minimal wind damage. I did email Cruz Preformance in Tampa to see about bringing my car in to have it checked. His shop is the closest to my location...

Engine noise video Engine noise #2 Eng8ne noise #3

I took hose clamps and reattached the hose securely to the PCV. Took it out for a spin and after a warm up did a few WOT pulls from speed so if wouldn’t down shift. Pulled good with not backfire but I got a lot of retardation going on. The hose held although It idles rough and feels rough when...

Do you think the valve is bad or did the hose finally give way? May be able to just hose clamp the hose back on the existing valve to keep it secure I’m guessing as long as I didn’t FUBAR anything engine wise with all the backfiring.

I assume it blowing off was my bad running culprit . Don’t think I really hurt anything do ya? I assume I can get the valve from local store but I wonder what in the heck is added to it and why? Mac

Took car out tonight and when I did a WOT run it backfired a few times and had a weird burnt smell....had a lot of retardation on the Scanmaster. It the started running really rough and surging. When I got home I popped the hood and heard a vacuum leak sound. Did a search and found this I...

With my older 5.7 TT chip, is this what is considered adjustable? My main question is since I don’t drive often I have a battery disconnect on my car to keep the battery from draining but I read where possibly this could cause issues with the ECU being not powered for so long and a loss of...

Been awhile since I posted.......did a slight mod on the KB intake to get more air. The enclosed canister to me seemed restricted when compared to CAIs of today. I left the Ram Air tube hooked up but open up some breathing from the top of the intake as well.

Thanks... Luckily Irma did get me orcthe GN. Hope everyone else did the same !!!