Recent content by AlexK86

  1. A

    60lb injectors and 93 octane TT chip

    SOLD ****
  2. A

    60lb injectors and 93 octane TT chip

    PM sent
  3. A

    60lb injectors and 93 octane TT chip

    Price drop - 275 shipped.
  4. A

    60lb injectors and 93 octane TT chip

    Sorry, 15-17 PSI.
  5. A

    60lb injectors and 93 octane TT chip

    Good afternoon, Selling my 60lb injectors and TT chip, upgrading to bigger injectors. Perfect working order, had them cleaned a couple years ago. Chip is for 93 octane, 15-17PSI. 275 shipped. SOLD*** Thanks! Alex
  6. A

    fwd roller and non roller cam parts in gn motor w/pictures

    Ill BUMP it, seeing as these guys gave me the info I needed to convert mine. October 2021, 88 buick century dogbone/spider setup, mid 1990s GM shorty lifters out of a Grand Am. Drilled and tapped two holes in the block, and used some sleeves as standoffs for the tray. Have pictures if anyone is...
  7. A

    Injectors and matching chip

    PM sent
  8. A

    Roller rockers, cam sensor cap

    Recently purchased both items. Thanks everyone!
  9. A

    Roller Rockers For 8445 Heads

    I know @wickedtt had some very recently…shoot him a PM. T&D 1.55 ratio.
  10. A

    Factory hotair HG, bumping static CR 86’ 109

    Thanks for the response. I figured this CR is actually still quite low, just more curious than anything if anyone has been successful using this method. Car is a 93/alky car.
  11. A

    Factory hotair HG, bumping static CR 86’ 109

    Looking for some “chiming in” on my idea. after a vacant search result, I was able to successfully put my hands on a set of 25524559 .018” compressed head gaskets. I believe they came on the hotair cars. Anyways…. my current motor is a stock crank,rod, and old school dished Wiseco piston .020...
  12. A

    Stock hotair .017” headgaskets

    Looking for a pair of .017” compressed head gaskets, part #25524599. Inquiring before I possibly bite the bullet on some RJC gaskets. Thanks!
  13. A

    Pac 1201s, stock shafts w/ braces? RRs mandatory?

    I saw the prices of linkbars and still cant believe it, especially after seeing all the problems people have had with these aftermarket sets. I know some are good units, but for less than 50 bucks, I have setup the lifters, tray and dogbones. Correct lifter preload and a healthy set of lifters...
  14. A

    Pac 1201s, stock shafts w/ braces? RRs mandatory?

    Its not for the faint of heart, but not extremely difficult either. Have to drill a couple holes in the lifter valley for the tray, and find some bushings or studs to stand it off the valley floor. Just a little creativity is needed.
  15. A

    Pac 1201s, stock shafts w/ braces? RRs mandatory?

    I am going to use the short style mid 90s GM roller lifters that came in a variety of cars at the time. I purchased the tray and dogbones off Ebay from an 88 Century.
Top