question

jlat

Well-Known Member
Joined
Jun 3, 2009
hello people; Is the guy that made alum. rad and a twin fan set up still a vendor here? His company name was like Aralco or something like that that started with an A.
IBBY
 
He's gone. Cold Case (stock looking with both trans and oil cooler) sells one that's similar to what he sold. Vendors here sell it along with a fan set up. There are other replacements sold by vendors here and there is a plastic tank version with both coolers on Rock Auto. At the high end is BeCool. If you don't want the oil cooler there are other options with the trans lines going to the engine side of the radiator.
 
alradco no longer available ....a reasonable price ...very good choice is the champion one ..the f body requires external trans or oil cooler cant rember which...the other one on rock auto requires mods to trans lines as they will hit the ac condenser ...check this thread out for the champion brand

 
hello people; I got his twin fan set-up and quickly holding it up to my stock set up and his mounting points are not the same as stock. I was wondering what the deal is.
IBBY
 
Alradco radiator & dual fans fit into the OEM upper & lower mounts without modifications. Sandwiches in place.
 
Aftermarket duals need custom mounting. Easy enough to bend a few tabs up to mount. Are you running the stock set up with both coolers? If so then you need a stock replacement. If you want to eliminate the oil cooler you can go with a regular G body radiator. The lines will need to be modded but again no huge issue.
 
 
hello people; I believe his name is on the box so when I get home I will know. I got the item a while ago and never put it on the car.

IBBY
Alradco radiator & dual fans fit into the OEM upper & lower mounts without modifications. Sandwiches in place.
Alradco radiator & dual fans fit into the OEM upper & lower mounts without modifications. Sandwiches in place.
I don't know about that and the mounting slots made with the Alradco are not close at all.
 
hello people; I believe his name is on the box so when I get home I will know. I got the item a while ago and never put it on the car.

IBBY


I don't know about that and the mounting slots made with the Alradco are not close at all.

The Alradco radiator & dual fan assembly dropped into place, no problems. That is why I bought that design.
 
The Alradco radiator & dual fan assembly dropped into place, no problems. That is why I bought that design.
I have a 86T. I wonder if there's any changes with a GN? Was your locating points slotted?
IBBY
 
Exactly the same radiator and associated items between a T and GN.
 
hello people; I heard maybe 70 degrees here in Mass. on Sunday. I'll be looking better at my situation soon but I'll be back with what I find..
IBBY
 
hello people; I do have a alradco product. To any one who has there dual fan set up. Could you give me some overall dimentions. What I have measures 26" wide x 18" high with lead in dims. of 3.500" from edge to center of mounting points. Maybe he made dual fans for more than one type of car? Funny the wire harness instructions talk about connecting the Buick conn.
IBBY
 
Nope. Paid them for a radiator and never got it

Sent from my SM-G950U using Tapatalk
 
Nope. Paid them for a radiator and never got it

Sent from my SM-G950U using Tapatalk
hello people; That sucks but going to there phone number I got on line a women picks up and says leave a message. I did and I will be calling them again.
IBBY
 

I am in need of a stock replacement radiator. Does this one you mentioned directly hook up to stock engine oil cooler lines and trans cooler?

I was thinking of Fbody as well but don’t know what it takes to make engine oil cooler lines work.
 
Top