Shop clean-up...Lower arms/springs/ball Joints, Cruz and stock pulleys, valve covers, big brake kit, etc.

captrob

Slow GN Fizz!
Joined
May 30, 2001
1) Front lower control arms with Global West delrin bushings. The arms were painted with POR-15 about 20 years ago…pretty good shape, definitely not perfect. Bushings are in great shape about 20 years old and approximately 10,000 miles. Serviced every year with quality high temp grease.
$40 for the pair plus shipping.
FrontArms2.jpgFrontArms1.jpg

2) I have 2 pairs of brand new Summit press in lower ball joints : ½” taller #SUM-77-1130002, or 1” taller #SUM-77-1130003
$70 a pair plus shipping.
LowerBalls.jpg

Or…
I can press your choice in to above arms if wanted.
$110 plus shipping for pair of arms and pair of ball joints pressed in.

3) Upper Ball joints – Proforged 101-10020 ½” taller bolt-in to front stock upper arms.
$60 for the pair plus shipping.
UpperBalls.jpg
4) Front Eibach Pro kit lowering springs. About 20 years old, ~10000 miles. Have been sitting on a shelf for the last 10 years.
$50 plus shipping…Heavy
ProSprings.jpg

5) 5 Piece Cruz Performance pulley set. Only installed, never run. Billet aluminum pulleys. I switched to black pulleys, so my fashion fickleness is your gain.
$350 shipped to the lower 48 states.

6) Billet throttle body vacuum block – Finned top 86/87 stock style with gasket and SS hardware.
$10 plus shipping.
Block.jpg

7) Stock parts … $ just pay shipping
a) 2 86/87 Passenger side valve covers– 1 was polished a long time ago, the other is bare.
Valves1.jpgValves2.jpg
b) Stock crank pulley
c) Tensioner pulley
d) Stock turbo inlet with rubber cap
StockPulley.jpg
e) Passenger side intercooler bracket
ICbracket.jpg

8) Big Brakes for B-Body big bearing tall spindles, (no spindles included) – about 15 years old, ~7000 miles, been sitting on a shelf for about 10 years. Good shape just dirty. All were new parts when I converted to the big brake setup.
Includes: Pairs of each - Rotors, bearings, seals, calipers, pads, pins, and SS hoses
$Free pickup in Keller, TX – North Fort Worth area or meet up in DFW for a social distancing brew.
Too big and heavy to ship unless you want to pay it.


Can also arrange pickup in Keller, TX or meetup in DFW area.
PayPal preferred…captrob@hotmail.com

Thanks, Rob
Rob Pahl
Keller, TX
 
Pics of Cruz pulleys and big brakes
 

Attachments

  • Pulleys1.jpg
    Pulleys1.jpg
    703.6 KB · Views: 328
  • Pulleys2.jpg
    Pulleys2.jpg
    728.6 KB · Views: 339
  • Bbody brakes.jpg
    Bbody brakes.jpg
    3.8 MB · Views: 369
2nd on #6 and I'll take #7, THANK YOU. Just let me know what you need for shipping to 06016. Thanx again! Ken
 
Interested in the free stuff and maybe the $40 lowers with the fancy bushings. I will pm.
 
Updated list of items still available :
2) I have 2 pairs of brand new Summit press in lower ball joints : ½” taller #SUM-77-1130002, or 1” taller #SUM-77-1130003
$70 a pair plus shipping.

4) Front Eibach Pro kit lowering springs. About 20 years old, ~10000 miles. Have been sitting on a shelf for the last 10 years.
$50 plus shipping…Heavy

8) Big Brakes for B-Body big bearing tall spindles, (no spindles included)

I've replied to all so far.
Thanks, Rob
 
Sorry guys, I haven't logged on in a while.
Vacuum block was sold.
I'll check on the intercooler bracket. I can't remember if I still have it or not.
Rob
 
Top