Parts going to BPG/Norwalk

Buicksx2

RCA: Home of the The Jack
Joined
May 25, 2001
PARTS GOING TO BPG

GM SUNROOF TAKEN OUT OF BURGUNDY INTERIOR CAR – NO WIRES CUT $450

BURGUNDY INTERIOR PIECES – UPPER AND LOWER DOOR PANELS WITH CONCERT SOUND WITH ARM RESTS AND 1 LIGHTED VISOR- UPPERS NOT SHOW QUALITY – $300

BURGUNDY SPEEDO PAD $75

DASH/SPEEDO BEZEL WITH OPENING FOR INTERIOR LIGHTS AND REAR DEFROSTER AND RADIO BEZEL TRIM PIECE $150

1 REAR BUMPER PAINTED WHITE $50

1 ALUMINUM BUMPER SUPPORT $150

STOCK FRONT SWAY BAR $50

1 PAIR BRAND NEW PPG WINDOW GLASS FOR 87 REGAL $125

9 HOLE HOOD PAD ORIGINAL – USABLE – NOT PERFECT NOS $235

SNAP ON MT 402 ALT/GEN/REG TESTER BRAND NEW NEVER USED $45

1 MOROSO ROUND TRANS COOLER $20

FEL PRO HEAD BOLT SET ES74022 $25

ATR CANISTER RELOCATION BRACKET $25

SUMMIT 0-8000 3” TACH $30

TWO SMALLER PERMACOOL 12VOLT FANS $20 A PIECE

SEVEN GM BUSHING – NEW $5 APIECE

PERFORMANCE FUEL SYSTEM ON RAIL FUEL GAUGE $20

STOCK CRANK – NEEDS TO BE CUT $150

ONE PAIR GN SPOILER END CAPS SMALL CHIP ON INSIDE LIP $75

PLX M-300 AIR/FUEL RATIO $175

THREE FUEL PUMP HANGARS SOLD AS IS $35 A PIECE

THREE TRANSMISSION DETENT CABLE BRACKETS $75 EACH

ONE POWER ANTENNA REPLACEMENT INSERT $75

TWO TIMING COVERS - $100 A PIECE

USED FUEL LINES TO RAIL $25

BLUE GLOVE BOX $15

14 STOCK INJECTORS $25

1 SET USED DIRECTIONAL TURN SIGNALS OFF GARAGE KEPT 61K LIMITED $50

2 SETS OF USED DIRECTIONAL TURN SIGNALS $40 FOR ALL FOUR

6 STOCK FUEL PRESSURE REGULATORS $10 EACH

CHROME FP REGULATOR COVER $15

ONE T-TYPE RIM $75

3 IC SCREENS $10 A PIECE

1 MINI STARTERS $45

GRAND NATIONAL EMBLEM SET (ALL 5) – GOOD SHAPE $150

5 STOCK HEADLIGHT TRIM BEZELS $50 FOR ALL

TRANS CABLE TO SPEEDO $50

OIL LINE/FILTER ADAPTER $40

2 CAM SENSORS $150 A PIECE

3” STAINLESS STEEL CATALYTIC CONVERTER - $150

5 SETS OF OUT OF DATE RACE HARNESS’ 3 RCI’S AND 2 SIMPSONS - $30 A PIECE

THREE OIL DRAIN BACK PIPES TO BLOCK $50 A PIECE

ONE OIL DIPSTICK COMPLETE - $55

ONE OIL DIPSTICK ONLY – NEEDS TO BE GLUED - $20

TWO TRANSMISSION DIPSTICK TUBES COMPLETE - $40 A PIECE

AUTOMETER PRO SHIFT LITE $45

SET OF DELPHI LUCAS 42# INJECTORS - $125

SET OF COMPETITION ENGINEERING DRAG SHOCKS- 50/50 AND 90/10 – USED $50

GAS TANK METAL STRAPS - $35

2” AUTOMETER VACUUM GAUGE $25

2 BUICK GRILL EMBLEMS $15 A PIECE

PULLEY FAN PAINTED BLACK $25

UNDER HEADER PANEL BRACKET $25

BALANCER PULLEY RING $25

1 SET CHROME DIRECTIONAL BRACKETS $25

STOCK TURBO INLET BELL $25

AC COMPRESSPOR/HEADER BRACKET $50

DOME LENS $10

USED IAC $15

1 USED AC LINE SHORT ONE $25

AUTOMETER TACH HOLDER $20

1 SET CRANE 8MM WIRES $35

I REAR BUMPER IMPACT STRIP TAKEN OFF 61K GARAGED LIMITED $75

BIG TUB OF MISC INTERIOR TRIM PIECES - $75 FOR WHOLE BIN AND TAKE BIN WITH YOU IF COMING TO BPG.

ALSO BRINGING A LOT OF SMALL $5 AND $10 PARTS…..TOO MUCH TO LIST HERE.

LARGER ITEMS LOCAL PICK UP ONLY OR CAN BRING TO NORWALK IF YOU WANT THEM

ALL PARTS SOLD AS IS – NO WARRANTIES EXPRESSED OR IMPLIED

ALL PRICES DO NOT INCLUDE SHIPPING OR PAYPAL FEES.
 
What size are the permacool 12v fans? May be interested in one. I plan to be in Norwalk also


Sent from my iPhone using Tapatalk
 
Could i have a pic and more info on the mini starter? Make? How old? Used for how long?
 
What size are the permacool 12v fans? May be interested in one. I plan to be in Norwalk also


Sent from my iPhone using Tapatalk
What size are the permacool 12v fans? May be interested in one. I plan to be in Norwalk also


Sent from my iPhone using Tapatalk
Shoot me an email address and I will shoot you a pic.......or look for white F350 and blue EZ UP at Norwalk and we will be there.
 
What's the "Autometer tach holder"? I'm interested.

Thanks,
Johnny

Hi Johnny,

It's basically the bracket that holds the tach that you can mount somewhere......if you shoot me an email address I can send you a pic.
 
I'll take the ATR canister relocation bracket if it's still available.
Shipping to Niagara Falls NY 14303
or
Maybe one of my Canadian brethren can grab it for me at Norwalk?
 
Do you have a NICE plastic passenger side inner fender well? If so, how much , can come to Norwalk for pickup.
 
I'll take the ATR canister relocation bracket if it's still available.
Shipping to Niagara Falls NY 14303
or
Maybe one of my Canadian brethren can grab it for me at Norwalk?
>>> Shipping will be about $14......or I can give it to one of the Canadian boys to bring back........just let me know and I will set it aside.
Thanks
 
>>> Shipping will be about $14......or I can give it to one of the Canadian boys to bring back........just let me know and I will set it aside.
Thanks


If one of the Canadian boys from the Toronto area could pick it up and bring it back....I'll reimburse them when they get home.
However, if it's too late and the crowd has already left for home....ship it out to me .
Let me know which way and I can PayPal the money if you end up shipping it.

Does this have the 2 mounting clamps that hold the charcoal canister to the bracket as well?

thanks

dave
 
If one of the Canadian boys from the Toronto area could pick it up and bring it back....I'll reimburse them when they get home.
However, if it's too late and the crowd has already left for home....ship it out to me .
Let me know which way and I can PayPal the money if you end up shipping it.

Does this have the 2 mounting clamps that hold the charcoal canister to the bracket as well?

thanks

dave
>>> Hi Dave........I will give it to Paul Beal and yes it does have the clamps......so we are good........I will give it to Paul and he can pay me so all is good!!
 
Top